UPS Assistant 2.0.1.49

UPS Assistant 2.0.1.49 presents a handy utility which is designed for monitoring of status of the Uninterruptible Power Supply (UPS), connected to a computer through USB- or COM-port and supporting the Megatec/Centralion protocol (Ippon, Mustek, Sven, Inelt).

Major Features:

1. Following UPSes are supported: UPS VID PID:
   
   • VID=$06DA, PID=$0003 - IPPON Mustek/Sven;
   • VID=$0F03, PID=$0001 - Inelt
   • VID=$0665, PID=$5161 - IPPON/Mustek/Sven
2. Monitoring of status of the UPS, connected to a computer through USB- or COM-port:
   
3. Logging accidents with the possibility of clearing UPS Log Clear and saving to a text file UPS Log Save
   UPS Log
   
4. Submitting reports on the status of the UPS with a given frequency and warnings of emergency situations via e-mail
   
   • UPS Reports
   • Host - SMTP server address
   • Port - SMTP server port (default 25)
   • Login - account name of SMTP server
   • Password - account password of SMTP server
   • From - sender e-mail address
   • E-Mail - recipient e-mail address
   • Subject - subject of test message
5. Toggle UPS beeper UPS Toggle Beeper
   
6. UPS battery test in 10 secondsUPS Battery Test
   
7. UPS battery test for specified time period Test
   
8. Program asks to specify the duration of the test Test Interval (this command is not supported by all UPS)
   
9. test until battery low Test: this command is not supported by all UPS
   
10. Cancel Test Cancel": this command is not supported by all UPS
    
11. Suspend UPS Standby, hibernate UPS Hibernate, shutdown UPS Shutdown (force - UPS Force)
    
12. Suspend, hibernate, shutdown at power fail (force - UPS Force):
    
    • At a voltage reduction on battery below admissible UPS Voltage
    • Through the set interval of time UPS Delay
13. Choice of used commands of Megatec/Mustek protocol Commands
    (for the changes to take effect must restart the program)
    
14. Autorun with Windows UPS AutoRun
    
15. Adjustment of an interval of updating of the information on a status of the UPS UPS Refresh
    
16. Save settings in Windows registry:
    
    •  On click the button UPS Settings
    • At an exit from the program UPS Exit
17. HTTP-server to receive reports via the Web with the possibility of user authentication
    • HTTP Server
    • Enabled - on / off HTTP-server
    • Port - port of HTTP-server
    • Authentication - the use of user authentication when accessing HTTP-server
    • User - user name (if you are using authentication)
    • Password - user password (if you are using authentication)

Enhancements:

• Revised algorithm exchange of information with the UPS and mechanism of threads synchronization - eliminated the program hangs and failures
• Added support for connecting to the UPS through a COM-port
• Added support for UPSes Mustek PowerMust 424/636/848
• Added command "Test until battery low"
  
• Added command "Test for specified time period"
  
• Added command "Cancel Test"
  
• Added support for command "I" ("UPS Information"), allowing to obtain information about the manufacturer ("Mfr."), model ("Model") and firmware version
  
• Added possibility to set used command of protocol Megatec
• When you click on the button "x" in the title window rolled in the system tray, and the exit occurs on the command "Exit" context menu when right-click on the icon in the tray
• Added balloon hints to the information on the status of the UPS

Requirements: Windows 2000, XP, 2003, Vista (x86 and x64), Windows 7 (x86 and x64).