Free atomic clock time synchronizer software for windows

Chronos Atomic Clock Synchronizer 4.5.2.0 comes as a perfect solution to help you connect and synchronize your internal computer clock with atomic clock time servers.

Major Features:

1. Connects on many atomic clock time servers;
2. You can add any time server needed; Improved algorithm to calculate differences between servers;
3. Calculates delays and synchronize on less than 0.1 seconds.

Time Synchronizer adjusts your PC clock with a public time server that uses an atomic clock Time Synchronizer adjusts your PC clock with a public time server that uses an atomic clock.
To automatically start Time Synchronizer every time you boot your system, connect to the time server, synchronize the clock and then quit... Just check the required entries in the configuration box.
If your system clock is very erratic you may want to set it to connect and adjust the clock every 5 or 10 minutes.

Time Synchronizer will synchronize the PCs internal clock with one of the several atomic clocks Time Synchronizer will synchronize the PCs internal clock with one of the several atomic clocks maintained by the United States National Institute of Standards and Technology by using NTP Internet protocol.
Just run the program and press the Get button.
After actual time has been retrived, you can synchronize PCs internal clock by pressing the Set button.
Time Synchronizer supports command line control.
Command line usage: TimeSync.exe [url] [key]
[url] - URL of NTP server
[key] - Time synchronizing key: use Y (yes) or N (no) for an automatic time synchronizing
Example: TimeSync.exe ntp.nasa.gov Y

Atomic Clock NTP Time Client allows a client to synchronise time to a selected NTP server TimeTools SNTP Client Software is a freeware program that runs on any Windows workstation and server. This software will allow a certain client to synchronise time to a selected NTP server.
The utility periodically polls the specified ntp server at periodic intervals specified by the user and optionally synchronises time to the server.
TimeTools SNTP client software and the Windows Time Synchronisation service (Windows Time) cannot co-exist on the same system, since they both attemp to use UDP port 123 (NTP). You can disable the Windows Time service from the service manager to avoid this problem and rely on the NTP server monitor to synchronise time.
Main features:
- Operates with unicast or broadcast NTP or SNTP
- Full audit log
- Ensures system time of client closely tracks that of an NTP server.
- Windows 32 bit service.