beams

Bright Beams Screensaver description
Bright Beams Screensaver contains a collection of 20 high resolution images of sunset sky The sunset will appear yellow usually when the air is clear. The light from the sun has passed a long distance through air and some of the blue light has been scattered away.

If the air is polluted with small particles, natural or otherwise, the sunset will be more red. Bright Beams is a gallery of some of the most beautiful sunsets ever taken.

Bright Beams Screensaver contains a collection of 20 high resolution images of sunset sky.

This program calculates deflection, slope, moment and shear at any specified point along a rigidly fixed, cantilever beam of uniform cross section. The calculation could be a single point calculation or a diagram for the entire beam. Distributed loads, point loads, applied moments or combinations of all three may be modeled. Results can be showed in tables or graphs, like deflection, moment and shear diagrams.

Here are some key features of "Cantilever Beams Calculator":

· Scenario definition. Up to ten different scenarios can be defined
·
· Single calculation for deflection, slope, internal moment and shear force
·
· Diagrams and tables for deflection, slope, internal moment and shear force
·
· on-line User Guide with examples
·
· on-line Programming Guide
·
· Hi-Resolution (320x480) support
·
· User-friendly interface
·
· RPN stack display
·
· Independent storage registers
·
· Upgrades / updates are life-time free of charge
·
· Palm keyboard support
·
· 5-way-navigation-buttons support

Single reinforced rectangular concrete beams analysis using ACI Code. this app uses International Unit System.

Single reinforced analysis of rectangular beams using ACI Code. This program uses English Unit System

Beam can analyse beams with differential equation of the curly axis of beam, multiple support, building M, Q, P, U diagramm, appearing in beam from attached external loads. Program produces check and selecting the section of the steel beams, described in ranges of the steel profiles. Results of calculation possible to export in format HTML, as well as in MS Word. Program is written on Delphi 7 for platform Windows.

Here are some key features of "Beam":

· Steady-state calculation multidimensional statically vague beams on loads, acting in vertical plane. Loads can be: concentrated power F, bending moment M, evenly and unevenly portioned load Q, as well as own weight of the beam.
· Selecting the section of the beam from ranges of renting or checking the user section. Expansion amount range.
· Building diagrams: sagging, angle of tumbling of the sections, bending moments and cross power with finding maximum and minimum importances and their snaps.
· Export result calculation in format HTML (htm) and MS Word (doc);
· Support ensemble units of the measurement for loads and distances;
· Support two languages (En/Ru).


Limitations:

· Greatly length of the beam - one kilometer;
· Amount intermediate full tilt - is not limited;
· Amount of concentrated power, bending moments, portioned loads - in registered versions is not limited;
· Maximum importance of the load - 1E10 kN (kN*m, kN/m);
· Tolerance at conclusion: minimum 0, maximum 4 signs;
· Width drawing for conservation in format HTML or MS Word: minimum 300, maximum 10000 points;
· Quality to compression drawing: minimum 50%, maximum 100%;
· Module to bounce of the material E: minimum 50000, maximum 1050000 MPA;
· Accounting resistance become Ry: minimum 10, maximum 1000 MPA;
· Factor reliability on load: minimum 0,5, maximum 2;
· Design value of the sagging: minimum 1/10000, maximum 1/10 from maximum stairwell of the beam.

This program calculates deflection, slope, moment and shear at any specified point along a rigidly fixed beam of uniform cross section. Four different beams are supported:
Cantilever Beams
Simply Supported Beams
Beams Fixed at Both Ends
Propped Cantilever Beams

The calculation (deflection, slope, internal moment, shear force) could be a single point calculation or a diagram for the entire beam. Distributed loads, point loads, applied moments or combinations of all three may be modeled. Refer to the on line help about subtitles and sign conventions.

Deflections must not significantly alter the geometry of the problem. Beams must be of constant cross section for deflection and slope equations to be valid. Stresses must be in the elastic region.

Other five calculators come in this package:
Date & Time
Decimal to Fraction
Mathematics
Statistics
Unit Conversion


Examples are supplied to show how powerful is this application. They show all you need, step by step.

NOTE: This calculator requires RPNCalcSeries Engine to run.

Here are some key features of "RPN CalcSeries Beam Mechanics":

· Palm devices supported: Z22; Tungsten E2; T/X; LifeDrive; Treo 650
·
· Hi-Resolution (320x480) support
·
· User-friendly interface
·
· RPN stack display
·
· independent storage registers
·
· Upgrades / updates are life-time free of charge
·
· Palm keyboard support
·
· 5-way-navigation-buttons support

MITCalc-Beam is created for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles.

Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:

- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supports.
- Calculation of minimum / maximum bending moment, stress and deflection of the beam.
- Calculation and graphic illustration of the moment, stress, deflection and bending angle of the loaded beam.

The application includes a table of materials and a table of area characteristics of W, S, C, L profiles acc. to ANSI/AISC and I, U, L a T profiles acc. to DIN/ISO.

Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU

This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.

MITCalc-Beam is created for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles.

Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:

- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supports.
- Calculation of minimum / maximum bending moment, stress and deflection of the beam.
- Calculation and graphic illustration of the moment, stress, deflection and bending angle of the loaded beam.

The application includes a table of materials and a table of area characteristics of W, S, C, L profiles acc. to ANSI/AISC and I, U, L a T profiles acc. to DIN/ISO.

Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU

This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.

This application is a simple RC beam design according to BS8110(British Standard). It perform quick and simple computation. It is usefull when attending meeting, discussion and site visits. With structural knowledge available, user can perform quick RC beam design that can obtain beam size with area of reinforcement required and links data.

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of the type of beam and its loading with visual check. - Calculation of area characteristics of 20 types of cross sections. - Calculation of reactions in supports. - Calculation of minimum / maximum bending moment, stress and deflection of the beam. - Calculation and graphic illustration of the moment, stress, deflection and bending angle of the loaded beam. The application includes a table of materials and a table of area characteristics of W, S, C, L profiles acc. to ANSI/AISC and I, U, L a T profiles acc. to DIN/ISO. Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LUThis module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others

The application is designed for calculations of straight, maximum three times static indefinite beams with constant
axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units
and solves the following main tasks:
- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supports.
- Calculation of minimum / maximum bending moment, stress and deflection of the beam.
- Calculation and graphic illustration of the moment, stress, deflection and bending angle of the loaded beam.
The application includes a table of materials and a table of area characteristics of W, S, C, L profiles acc. to
ANSI/AISC and I, U, L a T profiles acc. to DIN/ISO.
Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LUThis module is a part of MITCalc -
Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt
connection, shaft connection, tolerances and many others

Destucto Beam Font is a free and useful windows font.

Beam Off keeps your Beam Receive preference set to "Off" and may help to conserve your handheld battery power. It fixes the problem, seen on some Palm handhelds, where the Beam Receive preference is set to "On" intermittently after HotSyncing.

Requirements:

· Palm OS 4.0

beam-back is a simple Python script to save streaming MP3 data. This script has been tested with my.mp3.com and www.shoutcast.com. If you want to make an mp3 for an infinite stream m3u url, start beam-back with the option -v:
xterm -e beam-back.py -v %s

Verbose mode will tell you how much data has been read on a particular stream. Hitting ctrl-c in the xterm will cause beam-back to stop downloading and save the stream to a file.
The default name is "unfinished-stream.mp3" which can be changed with the -u option.

If you find the stream is dropping out and losing link unexpectedly, try the -p option.

Many internet radio sites use the .pls file format but the servers do not treat the mime type correctly :( You can save these streams in the following manner:
1) save the .pls file locally
2) from a linux prompt execute: ./beam-back.py -v pls_filename

Or you can set up both the two mime types:
audio/x-scpls
application/octet-stream
with suffix pls to "xterm -e beam-back.py -v %s"

Finally, if you want to setup cron jobs, you can stop and save a beam-back transfer by doing a kill -INT to the job.

This is an application that calculate the ultimate moment from given area of reinforcement with beam sizing. User has to understand on simplified stress block of RC beam (BS8110) Parameter of beam sizing, strength and area of reinforcement to be input and click calculate button to get the ultimate moment of given section.