cdrwin
CONVERT2ISO 1.0
convert a NERO NRG Image and a BIN (e.g CDRWIN) BIN to a standard ISO file more>> Convert2ISO convert a NERO NRG Image and a BIN (e.g CDRWIN) BIN to a standard ISO file.
And create a cuefile from a BIN image.<<less
CDrecord - convert a NERO NRG Image and a BIN (e.g CDRWIN) BIN to a standard ISO file. CONVERT2ISO. Convert2ISO convert a NERO NRG Image and a BIN (eExact Audio Copy 0.99 Pre-Beta 4
EAC is a new audio grabber for CD-ROM drives. The main differences towards most other audio grabbers : Low registration costs (just a postcard and a stamp), it works with a new technology, reading aud more>>
EAC is a new audio grabber for CD-ROM drives. The main differences towards most other audio grabbers : Low registration costs (just a postcard and a stamp), it works with a new technology, reading audio CDs almost perfectly.
If there are any errors that cant be corrected, it will tell you on which time position the (possible) distortion occurred, so you could easily control it with e.g. the media player.
Main features:
- Usage of the Windows 95 and Windows NT ASPI Interface, so both SCSI and ATAPI CD-ROM drives are supported
- Hidden sector synchronization (jitter correction)
- Secure, fast and burst extraction methods selectable. Fast extraction should run at the same speed as other grabbers, but is probably not exact anymore. Burst mode just grabs the audio data without any synchronization.
- Read error and complete loss of sync detection and correction in secure modes, as far as possible
- Output of time positions of all non-exact corrections and listen to these positions
- Copy of ranges of music data, not only tracks
- Automatic Speed reduction on errors and fallback afterwards
- Normalization of extracted audio
- Usage of the Windows Audio Compression Manager (ACM Codecs) for direct compression e.g. to MP3 waves
- Support for the BladeEnc DLL that is usable like an ACM Codec for online MP3 compression
- Support of external MP3, VQF, RA and AAC encoders for automatic compression after extraction
- Batch compression and decompression of/to WAV files
- Compression offset support for exact compression/decompression
- Detection of pre-track gaps
- Detection of silence in pre-track gaps
- Automatic creation of CUE sheets for CDRWin, including all gaps, indicies, track attributes, UPC and ISRC
- CD player functionality and prelistening to selected ranges
- Automatic detection of drive features, whether a drive has an accurate stream and/or does caching
- Sample Offsets for drives with no accurate streams, including the option of filling up missing samples with silence
- Option for synchronizing tracks for non-accurate stream drives
- Filename editing with local and remote CDDB database and cdplayer.ini support and more features like ID3 tagging
- Browse and edit local database
- Certified Escient CDDB(TM) Compatible
- Local CDDB support
- Record and Loop Record functions for recording from LP, radio, etc.
- Automatic rename of MP3 files according to their ID3 tag
- Catalog extraction function
- Multisession (CD-Extra) support
- CD-Text support
- CD-Write support for some drives
- ID3 Tag editor with drag and drop possibility from track listing and database
- Glitch removal after extraction
- Small WAV editor with the following functionality: delete, trim, normalize, pad, glitch removal, pop detection, interpolation of ranges, noise reduction, fade in/out, undo (and more)
- Program is Cardware, so feel free to copy
Detection of silence in pre-track gaps - Automatic creation of CUE sheets for CDRWin, including all gaps, indicies, track attributes, UPC and ISRC - CD player functionality and prelisteningin pre-track gaps, automatic creation of CUE sheets for CDRWin, including all gaps, indexes, track attributes, UPC and ISRC, automatic detection of drive features, whether a drive has an accurateCUE Splitter 1.1
CUE Splitter is a freeware tool that split a single big audio track, mostly an album or a compilation, into the relative individual audio tracks, using informations contained in the associated CUE more>> CUE Splitter is a freeware tool that split a single big audio track, mostly an album or a compilation, into the relative individual audio tracks, using informations contained in the associated "CUE" file. Sometimes you can find a big compressed audio file (for example MP3, APE, FLAC, OGG, WAV, WMA, etc...) equipped with a small "CUE" text file that contain informations about tracks title, artist and length. Usually these couple of files are generated by programs like EAC (Exact Audio Copy), CDRWin, BPM Studio, GoldWave or similar. With CUE Splitter you can obtain splitted audio track files without burn any CDR or decode/re-encode any audio data! Moreover audio files are automatically named using a user-defined "file mask" string, its tags are filled with informations extracted from "CUE" file and, optionally, an M3U playlist file can be generated (option enabled by default). CUE Splitter is released under the terms of the GNU General Public License (GPL) (http://www.gnu.org): what this means is that anyone is free to download and use this software! Program source code is available on http://cue-splitter.enfis.it. If you like this software and you wish contribute, feel free to make me a paypal DONATION: take a look at the about form or surf to http://www.enfis.it server...<<less
Usually these couple of files are generated by programs like EAC (Exact Audio Copy), CDRWin, BPM Studio, GoldWave or similar. With CUE Splitter you can obtain splitted audio track files withoutCD Mage 1.2.1 Beta 5
Scanning, repairing and extracting CD IMAGES more>> Scanning, repairing and extracting CD IMAGES
CDmage is a software utility, which performs different tasks with a common CD image files on your harddrive. The most-wanted being: scanning, repairing and extracting.
Image scanning
A: It checks sectors against corruption. There are rules defined by ISO standards, which must be followed by each sector of the CD. Other programs can perform similar checks as well, namely well known BINChunker and Fireburner. CDmage displays all corrupted sectors along with a description of each error found.
Image errors
CDmage can repair image errors, but not all errors can be repaired. CDmage uses a similar mechanism for repair as CD writer/reader does. It uses Error Correction Code fields (ECCP&ECCQ) of the sectors.
Safety of repairing corrupted sectors with CDmage
The repairing of corrupted sectors is 100% safe if corruption isnt intentional. Repaired sector is exactly like its original. Please note than not all image errors should be repaired. There are intentinal errors which are part of some copy protection schemes. Some CD ripping apps (CloneCD, BlindRead...) let you make working copy of your legally owned software. If copied software is copy protected, then its image files can contain intentional corruptions. Repairing of them would cause a non-working copy when burned.
Main features:
- support for Mode1/2048, Mode1/2352, Mode2/2336, Mode2/2352, Mode2/2056, CDI/2352, CDI/2336, CD+G/2448, Audio/2352 tracks
- support for multisession images.
- supported CD image file types: CDRWin/Fireburner: CUE, BIN, ISO
- BINChunker: ISO, TAO, MM2, PCM Nero Burning ROM: NRG (both DAO and TAO image types version 4.0.9.1 and above) CloneCD: CCD, IMG VirtualCD: FCD (uncompressed containers only) Farstone Virtual Drive: VCD (uncompressed containers only) BlindRead/BlindWrite: BWT, BWI DiscJuggler: CDI (both 2.x and 3.x versions) Gear Pro: RDB, MD1, XA NTI CD-Copy: CDP
- NTI CD-Maker 2000: NCD Prassi CD Rep Plus: GCD Cequadrat Winoncd: C2D
- Adaptec Easy CD Creator 4.x: CIF, ISO other: WAV (44.1 kHz 16 bit stereo only) view filesystem of any session (not only last)
- display LBA of any file/folder in the filesystem
- extract and convert tracks into any compatible supported format
- extract files from data audio tracks
- compare files with files burned on the cd or with files on the hd
- scan checkable tracks or sector range for corruption (all CDRWin, Nero, CloneCD, BlindRead, DiscJuggler, Gear, NTI CD-Copy, Prassi, Winoncd and Creator images)
- change LBA of the data tracks
- change volume label and other CD identification data of any session
- repair of corrupted sectors (all CDRWin, Nero, CloneCD, BlindRead, DiscJuggler, Gear, NTI CD-Copy, Prassi, Winoncd and Creator images)
- rebuild of fields of corrupted sectors - ECC/EDC regen (all CDRWin, Nero, CloneCD, BlindRead, DiscJuggler, Gear, NTI CD-Copy, Prassi, Winoncd and Creator images)
- locate content of corrupted sectors
- play audio and CD+G tracks direct from all image files without extracting while scanning, repairing, locating errors sector browser with sector field highlighting displaying of total disc time and overburn time for both 74 and 80 min cds.
- El Torito standard support (bootable cds), extraction of boot record (multiple-boot images are supported)
Enhancements:
- Added support for new format of .bwt images (BlindRead 0.99.2.0)
- Added option for disabling splash during startup
- Added "Extract" option to tree view context menu
- Rewamped find/compare commands. Results dont appear in separate windows, but in the "logs" (inside CDmage)
- Added ability to import "M" flag files (VideoCD, PSX etc.)
- Added option for importing of sector range (import to LBA)
- Added support for new format of .nrg images (Nero 5.5.2.4)
- Minor changes in progress bar behaviour (when extracting tracks it shows overall progress instead of track progress)
- Recent files in File menu remember their open as read-only setting
- Imported file doesnt need to be exact size as in the image. It is either truncated or padded to fit the size
supported CD image file types: CDRWin/Fireburner: CUE, BIN, ISO - BINChunker: ISO, TAO, MM2, PCM Nero Burning ROM: NRG (both DAO and TAO image types version 4.0.9.1 and above) CloneCD: CCD, IMGMedieval CUE Splitter 1.1
CUE Splitter is a freeware tool that split a single big audio track, mostly an album or a compilation, into the relative individual audio tracks, using informations contained in the associated "CUE" f more>>
Usually these couple of files are generated by programs like EAC (Exact Audio Copy), CDRWin, BPM Studio, GoldWave or similar. With CUE Splitter you can split audio track files without burningAnyToISO 1.0
Convert CD/DVD-ROM images to ISO format. more>>
AnyToISO 1.0 offers you a powerful converter that is designed to convert various (BIN, MDF, PDI, CDI, NRG, B5I, IMG) CD/DVD-ROM images to ISO format using Fast and Easy technology. This tool converts mdf to iso, convert mdf to iso, bin to iso .
Major Benefits:
- Convert BIN, MDF, PDI, CDI, NRG, B5I, IMG, DAA, UIF, DMG CD/DVD-ROM images to ISO, Extract DMG files.
- Universal, fast engine
- Works on Windows and Mac OS
- AnyToISO supports all CD/DVD formats popular in Internet.
- AnyToISO works on Windows and Mac OS X.
- Most CD/DVD burning software works with ISO images and its native images only. Use AnyToISO for conversion before burning.
- With AnyToISO you can mount any CD/DVD image found in Internet to your Parallels/VMW are virtual machine.
Major Features:
- MDF to ISO conversion: MDF is a disc image created using Alcohol 120% program.
- BIN to ISO conversion: BIN is a disk image format, supported by programs like Roxio Toast, NTI Dragon Burn, Roxio Easy Media Creator, Golden Hawk Technology CDRWin, Daemon Tools, IsoBuster, EZB Systems UltraISO.
- DMG to ISO conversion, Extract DMG on both Windows and Mac OS X: Macintosh OS X Disk Copy Disk Image File. The format is completely proprietary.
- IMG to ISO conversion: IMG is a CloneCD disc image file.
- CDI to ISO conversion: CDI is a disc image created using DiscJuggler. Supported by Padus DiscJuggler, EZB Systems UltraISO, IsoBuster, PowerISO.
- NRG to ISO conversion: NRG is a disc image created with Nero CD.
- DAA to ISO conversion: DAA is a is a CD/DVD image file created using PowerISO program. This format supports compression, password protection and splitting image to multiple volumes.
- UIF to ISO conversion: UIF is a is a CD/DVD image file created using MagicISO program. This format supports compression and password protection.
- B5I to ISO conversion: B5I is a disc image created with BlindWrite program.
Enhancements: initial release that supports MDF, BIN, CDI, NRG, IMG,B5I, PDI formats
- Page: 1 of 1
- 1
