fcc
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 8
File Compare and Copy (FCC) 0.2.1
FCC is used to compare the contents of two folders. FCC will looks for files with matching names and compare their time and date and include the new one in a list. FCC can copy the files in the result more>>
Extremely small folder comparison program. A freeware with only 52K in size. It is very easy to use with no installation required. Just download the program and execute it! Just a single executable file.
FCC can compare the contents of two folders. FCC will looks for files with matching names and compare their time and date and then include the newer files in a list. FCC can also copy the files in the resulting list to another folder.
<<lessFCC can compare the contents of two folders. FCC will looks for files with matching names and compare their time and date and then include the newer files in a list. FCC can also copy the files in the resulting list to another folder.
Download (52K)
Added: 2004-08-27 License: Freeware Price: $0.00
1196 downloads
MLC 0.5
A lossless codec that uses the VFW standard more>> A lossless codec that uses the VFW standard
MLC was designed to be a lossless codec that uses the Vfw standard. It uses FCC code MLCY. Codec supports YUY2, YV12 and RGB24 color spaces.
Enhancements:
- multithreading mode added
- compression ratio similar with previous version
- inner data format modified (no backward compatibility)
Download (55KB)
Added: 2008-10-02 License: Freeware Price: FREE
392 downloads
Century Club Logger 3.07
Century Club Logger is for anyone whether a Net Control Station or just a user checking into any of the 3905 Century Club Nets more>>
Century Club Logger is for anyone who wants to check into any of the 3905 Century Club Nets who needs to maintain accurate records about all aspects of particular net.
You will be required to register and make a donation within 1,000 days of your first use of the program to use for lifetime.
Main features:
- Comprehensive Contact Management
- Excellent tool for Net Control Stations (NCS)
- Interfaces with FCC data bases
- Import check in data from Email Reflector
- Interactive Monitoring of Century Club Nets
- Email check in list to Reflector or Email lists
- QSL Buro support
- Club Officers/Master holders
- Century Club Award Membership award history included.
- QSL card and label generation
- Comprehensive Report management. All reports are customizable by the user.
- Century Club Award Generation.
- Complete FCC database included.
- Complete Canadian RAC database included.
- QRZ.COM lookup support.
- Fully customizable
- Easy to use point and click Windows 32Bit interface
- Intelligent fields correct common entry mistakes
- Designed for quick entry using keyboard and shortcuts
- Field wizards help you to enter the correct information
- Store contact information for stations to recall later on
- Record stations address, comments
- Download updates from the FCC and Buro Managers
- Quick database storage, instantly records contacts
- ADIF Log inport/export including Logbook of the World
- Conversion from other Logging programs (BML, etc)
- Over 100 pages of help
<<lessYou will be required to register and make a donation within 1,000 days of your first use of the program to use for lifetime.
Main features:
- Comprehensive Contact Management
- Excellent tool for Net Control Stations (NCS)
- Interfaces with FCC data bases
- Import check in data from Email Reflector
- Interactive Monitoring of Century Club Nets
- Email check in list to Reflector or Email lists
- QSL Buro support
- Club Officers/Master holders
- Century Club Award Membership award history included.
- QSL card and label generation
- Comprehensive Report management. All reports are customizable by the user.
- Century Club Award Generation.
- Complete FCC database included.
- Complete Canadian RAC database included.
- QRZ.COM lookup support.
- Fully customizable
- Easy to use point and click Windows 32Bit interface
- Intelligent fields correct common entry mistakes
- Designed for quick entry using keyboard and shortcuts
- Field wizards help you to enter the correct information
- Store contact information for stations to recall later on
- Record stations address, comments
- Download updates from the FCC and Buro Managers
- Quick database storage, instantly records contacts
- ADIF Log inport/export including Logbook of the World
- Conversion from other Logging programs (BML, etc)
- Over 100 pages of help
Download (34.7MB)
Added: 2006-09-06 License: Freeware Price:
1150 downloads
HamTime2 2.0.0.2
HamTime2 2.0.0.2 offers an effective tool which functions as a Ham radio operator. FCC regulations demand that you announce your callsign at least once every ten minutes, and HamTime runs in the more>> <<less
Download (502.17KB)
Added: 2008-12-20 License: Freeware Price:
202 downloads
HamTime 1.0.5
HamTime - Free Ham Radio HamTimer Countdown Alarm software more>>
HamTime - Free Ham Radio HamTimer Countdown Alarm software This program was requested by a Ham radio operator. FCC regulations demand that you announce your callsign at least once every ten minutes, and HamTime runs in the corner of the screen and gives you an audible alarm when that announcement is due.
HamTime is a little tool that will remind you to broadcast your callsign every 10 minutes as per FCC regulations
<<lessHamTime is a little tool that will remind you to broadcast your callsign every 10 minutes as per FCC regulations
Download (1.79MB)
Added: 2007-07-31 License: Freeware Price:
823 downloads
NetPopUp 1.1
This was in response to unscrupulous advertisers using the service to pop up ads more>> As of SP2 in Windows XP, Microsoft has desabled the service that allows you to send popups to other PCs. This was in response to unscrupulous advertisers using the service to pop up ads. This tool will still work if you specifically enable the service, but in my experience the only PCs that still allow this are old Win98 and Win2000 machines.
NetPopUp is a replacement for the Command Prompt tool NET SEND. This program allows you to send pop-up messages to other computers on your local network, or any PC that you have the TCP/IP address for. NetPopUp offers a few amusing benefits over NET SEND, however:
You can specify what you want to appear in the FROM line!
NET SEND always identifies your computer name when you send someone a pop-up. NetPopUp can make it appear those popups come from someone else! (For real amusement, try sending a message from "FCC" saying "You are playing an illegally copied MP3, a warrant has already been issued against you, and your equipment will be confiscated within 24 hours. Click OK to admit guilt.")
NET SEND cannot tell you which computer on your network are suitable to receive popups (OK, we wont call them victims, well call them recipients of inter-office-humor!). NetPopUp can! It has a network scanning tool that scans each computer on your network and reports all WindowsNT, 2000, and XP based machines that can receive popups.
NetPopUp is a nice simple Windows program. No command prompt needed!<<less
Download (1.41MB)
Added: 2008-07-06 License: Freeware Price: Free
474 downloads
Other version of NetPopUp
(For real amusement, try sending a message from "FCC" saying "You are playing an illegally copied MP3, a warrant has already been issued against you, and your equipment will be confiscated withinLicense:Freeware
DigiPan 2.0
DigiPan - bring the ease and simplicity of PANORAMIC reception and transmission to PSK31 and PSK63 operation more>>
DigiPan - bring the ease and simplicity of PANORAMIC reception and transmission to PSK31 and PSK63 operation DigiPan stands for "Digital Panoramic Tuning" and was designed to bring the ease and simplicity of PANORAMIC reception and transmission to PSK31and PSK63 operation. DigiPan provides a panoramic display of the frequency spectrum in the form of an active dial scale extending the full width of the computer screen. Depending upon the transceiver IF bandwidth, it is possible to "see" as many as 40 to 50 PSK31 stations at one time.
Low-cost transceiver kits for 10 meters, 20 meters, 30 meters, 40 meters, and 80 meters, the PSK-10, PSK-20, PSK-30, PSK-40, and Warbler (PSK-80), are available from Small WonderLabs that make full use of DigiPans panoramic capabilities through the use of a 3000 Hz wideband IF
In addition to using DigiPans PACTOR RX to identify a PACTOR mailbox signal, which only consistently transmits identification if it is successful in connecting with a fixed PACTOR station, mobile PACTOR mailbox stations are also supposed to transmit their callsign in either PACTOR or CW if they fail to connect with a fixed automatic PACTOR station.
This identification has always been required by FCC regulations, and was supposed to have been phased in over the summer of 2003, but it is almost never done. Listen for CW ID at the end of the PACTOR transmission if it does not trigger a transmission from the other PACTOR station, or quickly switch DigiPan to PACTOR RX and look for the callsign of the calling station.
For example, when you see , W1AW is the callsign of the fixed PACTOR mailbox station being called, not the callsign of the calling station. If sent by PACTOR, the callsign of the calling station will be shown in addition to the called stations callsign, or by CW at the end of the PACTOR transmission.
<<lessLow-cost transceiver kits for 10 meters, 20 meters, 30 meters, 40 meters, and 80 meters, the PSK-10, PSK-20, PSK-30, PSK-40, and Warbler (PSK-80), are available from Small WonderLabs that make full use of DigiPans panoramic capabilities through the use of a 3000 Hz wideband IF
In addition to using DigiPans PACTOR RX to identify a PACTOR mailbox signal, which only consistently transmits identification if it is successful in connecting with a fixed PACTOR station, mobile PACTOR mailbox stations are also supposed to transmit their callsign in either PACTOR or CW if they fail to connect with a fixed automatic PACTOR station.
This identification has always been required by FCC regulations, and was supposed to have been phased in over the summer of 2003, but it is almost never done. Listen for CW ID at the end of the PACTOR transmission if it does not trigger a transmission from the other PACTOR station, or quickly switch DigiPan to PACTOR RX and look for the callsign of the calling station.
For example, when you see , W1AW is the callsign of the fixed PACTOR mailbox station being called, not the callsign of the calling station. If sent by PACTOR, the callsign of the calling station will be shown in addition to the called stations callsign, or by CW at the end of the PACTOR transmission.
Download (651KB)
Added: 2007-08-01 License: Freeware Price:
555 downloads
Pine 4.64
Program for Internet News & Email more>>
Pine - a Program for Internet News & Email - is a tool for reading, sending, and managing electronic messages
Main features:
- Online help specific to each screen and context.
- Message index showing a message summary which includes the status, sender, size, date and subject of messages.
- Commands to view and process messages: Forward, Reply, Save, Export, Print, Delete, capture address, and search.
- Message composer with easy-to-use editor and spelling checker. The message composer also assists entering and formatting addresses and provides direct access to the address book.
- Address book for saving long complex addresses and personal distribution lists under a nickname.
- Message attachments via the Multipurpose Internet Mail Extensions (MIME) specification. MIME allows sending/receiving non-text objects, such as binary files, spreadsheets, graphics, and sound.
- Folder management commands for creating, deleting, listing, or renaming message folders. Folders may be local or on remote hosts.
- Access to remote message folders and archives via the Internet Message Access Protocol (IMAP).
- Internet news support via either NNTP or IMAP.
- Aggregate operations, e.g. saving a selected set of messages at once.
Enhancements:
- Enable-Newmail-in-Xterm-Icon now also sets the title bar text to indicate new mail
- New feature Enable-Newmail-Short-Text-in-Icon
- New feature NewMail-Window-Width
- Select command may use the pattern from an existing Rule (for example, an Indexcolor Rule) for its selection criteria
- Beginning of Month and Beginning of Year options in Rules
- Some additional tokens having to do with the current date may be used in the folder name that is used as a target in a Filter Rule. For example, you may filter messages to a folder named for the current month by using the _CURYEAR_ and _CURMONTH_ tokens in the folder name. The (long) list of all such tokens is here.
- Three additional tokens for use with Keywords may be used in the Index-Format. They are SUBJKEYINIT, KEY, and KEYINIT (in addition to the old SUBJKEY).
- Keywords may be displayed in color using Keyword Colors, available from the Setup/Kolor screen
- The Keyword-Surrounding-Chars option may be used to slightly modify the display of SUBJKEYINIT and SUBJKEY tokens.
- The Enable-Flag-Screen-Keyword-Shortcut option adds a shortcut method of setting keywords
- When performing an aggregate reply (or forward), if the Role that would be selected when replying (or forwarding) to each individual message in the set is the same for all the messages, then that role is used just like it would be when replying (or forwarding) to any one of those messages.
- Delete/No Delete prompt added to Save command so that the source message may be deleted or not on a Save-by-Save basis
- Status-Message-Delay option now allows reducing the status message delays Pine sometimes adds
- New feature Save-Partial-Msg-Without-Confirm
- New feature Disable-Take-Fullname-in-Addresses
- New feature Sort-Default-FCC-Alpha
- New feature Sort-Default-Save-Alpha
- For selecting messages by Status, add the possibility of selecting based on Recent or Unseen status
- Allow Take command to take addresses from html and enriched text subtypes, as well as from plain text
<<lessMain features:
- Online help specific to each screen and context.
- Message index showing a message summary which includes the status, sender, size, date and subject of messages.
- Commands to view and process messages: Forward, Reply, Save, Export, Print, Delete, capture address, and search.
- Message composer with easy-to-use editor and spelling checker. The message composer also assists entering and formatting addresses and provides direct access to the address book.
- Address book for saving long complex addresses and personal distribution lists under a nickname.
- Message attachments via the Multipurpose Internet Mail Extensions (MIME) specification. MIME allows sending/receiving non-text objects, such as binary files, spreadsheets, graphics, and sound.
- Folder management commands for creating, deleting, listing, or renaming message folders. Folders may be local or on remote hosts.
- Access to remote message folders and archives via the Internet Message Access Protocol (IMAP).
- Internet news support via either NNTP or IMAP.
- Aggregate operations, e.g. saving a selected set of messages at once.
Enhancements:
- Enable-Newmail-in-Xterm-Icon now also sets the title bar text to indicate new mail
- New feature Enable-Newmail-Short-Text-in-Icon
- New feature NewMail-Window-Width
- Select command may use the pattern from an existing Rule (for example, an Indexcolor Rule) for its selection criteria
- Beginning of Month and Beginning of Year options in Rules
- Some additional tokens having to do with the current date may be used in the folder name that is used as a target in a Filter Rule. For example, you may filter messages to a folder named for the current month by using the _CURYEAR_ and _CURMONTH_ tokens in the folder name. The (long) list of all such tokens is here.
- Three additional tokens for use with Keywords may be used in the Index-Format. They are SUBJKEYINIT, KEY, and KEYINIT (in addition to the old SUBJKEY).
- Keywords may be displayed in color using Keyword Colors, available from the Setup/Kolor screen
- The Keyword-Surrounding-Chars option may be used to slightly modify the display of SUBJKEYINIT and SUBJKEY tokens.
- The Enable-Flag-Screen-Keyword-Shortcut option adds a shortcut method of setting keywords
- When performing an aggregate reply (or forward), if the Role that would be selected when replying (or forwarding) to each individual message in the set is the same for all the messages, then that role is used just like it would be when replying (or forwarding) to any one of those messages.
- Delete/No Delete prompt added to Save command so that the source message may be deleted or not on a Save-by-Save basis
- Status-Message-Delay option now allows reducing the status message delays Pine sometimes adds
- New feature Save-Partial-Msg-Without-Confirm
- New feature Disable-Take-Fullname-in-Addresses
- New feature Sort-Default-FCC-Alpha
- New feature Sort-Default-Save-Alpha
- For selecting messages by Status, add the possibility of selecting based on Recent or Unseen status
- Allow Take command to take addresses from html and enriched text subtypes, as well as from plain text
Download (2.57MB)
Added: 2005-11-09 License: Freeware Price:
1447 downloads
Secleted [ 0 ] software to compare
- Page: 1 of 1
- 1
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above fcc search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
