Free fdisk software for windows

The complete guide to fat32 file systems. Explains howto create them. Optimize them for full speed. How tomaintain your harddrive. Also explains FDISK and FORMAT System command. Fat32 is known for slowness to FAT16 systems. This guide will tell you how to optimize FAT32 to get maximum performance from it.

Parted Magic LiveCD 3 has strong function of employing core programs of GParted and Parted to handle partitioning tasks with ease, while featuring other useful programs (e.g. Partition Image, TestDisk, fdisk, sfdisk, dd, and ddrescue) and an excellent set of documentation to benefit the user.

An extensive collection of fileystem tools are also included, as Parted Magic supports the following: ext2, ext3, ext4, fat16, fat32, hfs, hfs+, jfs, linux-swap, ntfs, reiserfs, reiser4, and xfs.

Enhancements: Has updated with Linux 2.6.26, Parted 1.8.8, ntfsprogs-2.0.0, ntfs-3g-2712, and GParted-0.3.8.

HDCopy - make an identical copy of a hard drive onto another hard drive HDCopy is recommended to make a boot disk. On this disk should also be FDISK.
With HDCopy you can make an identical copy of a hard drive onto another hard drive. If you buy a new hard drive and don`t wish to change your Windows configuration in any way, you can use HDCopy to copy your old hard drive completely to the new one (hidden files as well).

SyMon has many improvements that will allow you to maintain several operating systems at one hard drive. The main features of SyMon are: Up to 36 simultaneous independent partitions with any file system, up to 20 operating systems using any 4 of 36 partitions. Built-in fdisk for easy creating, editing, deleting of the partitions. Built-in Setup dialog for operating systems. Multiple hard drives support. Can boot from second hard drive. Full support of drives larger than 8Gb. Partition search facility which can restore partition structure of disk. Password setting/checking for each OS, floppy booting, accessing the tools. Built-in disk editor with disassembler for low level disk structures reparing. Timer to start default operating system. Turning off the power for ATX power supplies. ... and more interesting features

NTRecover is a program designed to repair drives that are inacessible due to misconfigured or missing software Finally, the utility that NT system administrators have been waiting for. With NTRecover you can access a dead x86 NT systems disks from a good system over a serial connection. You can then salvage data off of the drives using native NT commands and utilities. With the write-version you can even run chkdsk on the dead systems drives! The read-only version is freeware.
NTRecover is an advanced Windows NT dead-system recovery utility for x86 NT installations. Using NTRecover, NT machines that fail to boot because of data corruption, improperly installed software or hardware, or faulty configuration, can be accessed and recovered using standard administrative tools, as if the machine were up and running. Using an adjacent NT-based computer connected by a serial cable , NTRecover allows an administrator to:
Copy files between the non-booting system and the working NT system.
Edit or delete files that may be preventing the system from booting.
Run virus detection and removal programs.
Repair damaged filesystem structures using chkdsk.
NTRecover consists of host and client software, where the host software runs on a "good" NT 3.51 or 4.0 system, and the client software executes on a "dead" system in need of repair. The "dead" system is booted off a floppy disk directly to the NTRecover program, so repair is possible even when basic startup code in NT, such as NTLDR, fails. The host and client machines are connected with a standard null-modem serial cable.
The NTRecover host software creates virtual disk drives on the host machine that represent the drives present on the client computer. When native NT file systems, such as NTFS and FAT, access the drives, NTRecover manages communications over the serial cable to the client software to transfer disk data back and forth between the two machines. As far as Windows NT on the host machine is concerned, the drives created by NTRecover are indistinguishable from the local drives present on the host, and so they can be manipulated with Windows NT disk utilties, including high-level tools like the Windows NT Explorer, and low-level tools such as chkdsk.
Be sure to check out Remote Recover, which provides you all the capabilities of NTRecover except that it works over TCP/IP LAN/WANs instead of a serial cable. Remote Recover is ideal for high-speed backup/restore/repair, especially when large amounts of data are involved.
NTRecover is a program designed to repair drives that are inacessible due to misconfigured or missing software. It is not meant for drives that have been physically damaged or with substantial destruction of on-disk data.
System requirements:
- NTRecover can access drives accessible using the Int 13 interface. This includes IDE drives and most SCSI drives (Int 13 based drives are also those supported by disk utilities such as PowerQuests Partition Magic). If you are unsure whether a given drive is supported, try running FDISK /STATUS from DOS. If FDISK can read the drive correctly then NTRecover should be able to as well.