heap stack buffer overflow monitor 1.0

Heap/stack buffer overflow monitor is the next-generation in innovative anti-virus technology for PCs and servers. It monitors heap/stack buffer overflow of malicious software of in real time, extends coverage for the new security risks, and reduces the cost of managing an outbreak response.

Buffer overflow vulnerabilities are the result of poor input validation, they enable an attacker to run his input as code in the victim. Buffer overflows are a favorite exploit for hackers. A vast majority of applications suffer unchecked buffer problems

Here are some key features of "Heap stack buffer overflow monitor":

· Automatic monitor all applications, provide the real-time protection from the viruses or hackers that carries on the attack using the buffer overflow problems.
· Prevents the attacks that arise from buffer overflow problems of some applications.Once a buffer overflow is found, the monitor will stop the attack behaviors and pop up a warning message.
· Interception rate of buffer overflow approach 100%. Effectively prevents your PC or Servers from worms such as Shockwave, Vibrationwave, W32.SQLexp.Worm and so on .
· High system performances, affect minimum, is smaller than 1%.
· Does not use the knowledge library, completely carries on the buffer overflow protection based on the unknown conditions, known or unknown attacks that using buffer overflow will be stopped

Overflow project is a board game about chain reactions.

Overflow is a board game for two players or one player against the computer. Put pieces on the board until critical mass is reached, and watch a chain reaction go off.

Although the rules are simple, several different tactical considerations are required in order to play the game well.

The name refers to the key principle in the game that each cell on the board can hold a maximum of three units (pieces), and if you add another unit to a filled up cell, the units will be distributed to the four neighbor cells.

Here are some key features of "Overflow":

· Play against the computer or another person
· Advanced hint feature
· Unlimited take backs and redos
· Ugly but scalable graphics
· Selectable colors

The HyperTerminal application is a utility that installs, by default, on all versions of Windows 98, 98SE, Windows ME, Windows NT, and Windows 2000. The product contains an unchecked buffer in a section of the code that processes Telnet URLs. If a user opened an HTML mail that contained a particularly malformed Telnet URL, it would result in a buffer overrun that could enable the creator of the mail to cause arbitrary code to run on the user s system. HyperTerminal is the default Telnet client on Windows 98, 98SE and ME. However, it is not the default Telnet client on Windows 2000, and Windows 2000 users who have not taken steps to make it the default Telnet client would not be affected by the vulnerability. (Windows NT4.0 is not affected by this vulnerability. The HyperTerminal client that ships with Windows NT4 does not include a TCP/IP connection method. As such, the NT4 HyperTerminal client cannot be setup as the default telnet client, and would not launch in response to a supplied Telnet URL.)

The HyperTerminal application is a utility that installs, by default, on all versions of Windows 98, 98SE, Windows ME, Windows NT, and Windows 2000. The product contains an unchecked buffer in a section of the code that processes Telnet URLs. If a user opened an HTML mail that contained a particularly malformed Telnet URL, it would result in a buffer overrun that could enable the creator of the mail to cause arbitrary code to run on the user s system. HyperTerminal is the default Telnet client on Windows 98, 98SE and ME. However, it is not the default Telnet client on Windows 2000, and Windows 2000 users who have not taken steps to make it the default Telnet client would not be affected by the vulnerability. (Windows NT4.0 is not affected by this vulnerability. The HyperTerminal client that ships with Windows NT4 does not include a TCP/IP connection method. As such, the NT4 HyperTerminal client cannot be setup as the default telnet client, and would not launch in response to a supplied Telnet URL.)

Elecard Buffer Analyzer description
This software utility allows analyzing of the decoder video buffer parameters. Elecard Buffer Analizer will help you analyze the parameters of the video buffer decoder.

Here are some key features of "Elecard Buffer Analyzer":

· Plotting of the buffer fullness curve
· Ability to save chart as a bitmap file
· Ability to select a stream for analysis, if the file contains several streams
· Ability to save the analysis report to .TXT file. Generated report contains the following information:
Buffer size
Bitrate value
Frame rate
Detected buffer overflow and underflow errors
Bitrate type (CBR, VBR)
Total and average padding (for MPEG-2 and AVC streams)
Specific format information
· Displaying (and saving to .TXT file) of the following frame information:
The frame number in the stream order
The time of frame removal from the buffer
Frame size
Padding size (for MPEG-2 and AVC streams)
Frame type (for MPEG-2 and AVC streams)
The time of frame arriving into the buffer (AVC)
· Ability to interrupt and resume stream parsing


Specifications:
· The program analyzes the decoder video buffer parameters for the following formats:
MPEG-2 Video (ISO/IEC 13818-2)
AVC/H.264 video stream (ISO/IEC 14496-10)
VC-1 Video (SMPTE 421M-2006)

· The Buffer Analyzer supports the following multiplexed formats:
MPEG-1 System Stream (ISO/IEC 11172-1)
MPEG-2 Program Stream (ISO/IEC 13818-1)
MPEG-2 Transport Stream (ISO/IEC 13818-1)
MP4 Stream (ISO/IEC JTC1/SC29/WG11)

Requirements:

· SSE-enhanced CPU (Intel Pentium III, AMD Athlon)
· 128 MB RAM
· Directx 7.0 or higher


Limitations:

· 21 days trial
· A maximum of 500 packages
· Nag screen

The HyperTerminal application is a utility that installs, by default, on all versions of Windows 98, 98SE, Windows ME, Windows NT, and Windows 2000. The product contains an unchecked buffer in a section of the code that processes Telnet URLs. If a user opened an HTML mail that contained a particularly malformed Telnet URL, it would result in a buffer overrun that could enable the creator of the mail to cause arbitrary code to run on the user s system. HyperTerminal is the default Telnet client on Windows 98, 98SE and ME. However, it is not the default Telnet client on Windows 2000, and Windows 2000 users who have not taken steps to make it the default Telnet client would not be affected by the vulnerability. (Windows NT4.0 is not affected by this vulnerability. The HyperTerminal client that ships with Windows NT4 does not include a TCP/IP connection method. As such, the NT4 HyperTerminal client cannot be setup as the default telnet client, and would not launch in response to a supplied Telnet URL.)

BufferCalc is designed to perform general buffer calculations.

Fractional composition, pH and alpha diagrams. It includes a database of 110 buffers.

Buffer Delay is a utility plug-in that delays audio by an exact number of sample frames, which can be useful when attempting to sync up audio accounting for delays through certain digital devices.

The plug-in delays incoming audio by an exact number of sample frames. E.g. if the audio rate is 44.1kHz and you select a delay of 1, the audio is delayed by one 44100th of a second.

The Delay 128 parameter sets a delay in multiples of 128 frames. The Delay parameter is added to this to provide fine single frame control.

Whats New in This Release:

· Now passes AUValidation.

V-STACK is a 32-bit VST instrument rack that can power up to 16 VST instruments, ideal either for live use on stage or extending your existing VST System Link network - without requiring an additional sequencer program.

V-STACK cheaply and conveniently extends the power of Cubase and Nuendo systems by integrating the CPU power of another computer that processes VST additional instruments. As a standalone application, V-STACK is the ideal performance rack for VSTis, providing a CPU efficient platform for integrating the power of VST instruments on stage.

Here are some key features of "V STACK":

· Lightning quick access to master keyboard functions like Transpose, Layer and Splitting of VSTi s
· Up to 5 insert effects, up to 8 send effects per audio channel and up to 4 EQ bands per channel and up to 4 subgroups
· Remote control: use your remote controller with V-STACK
· Ideal for VST System Link users! All Cubase and Nuendo systems can be extended by adding more computer processing power using V-STACK, CPU intensive VST instruments can be triggered and played in V-STACK from another computer with sample accuracy
· ReWire 2 support: audio channels can be sent from a ReWire-compatible application to V-STACK for effects and EQ processing.

ASF Buffer Fix description
ASF Buffer Fix - change values and fix ASF Buffer problems If you often run ASF/WMV files through Windows Media Stream Editor (to fix files that wont seek, remove extra streams, etc.), you may have seen this error message: "The video buffer setting is not valid".

ASF Buffer Fix is a simple tool designed to change a few values in the file headers to fix this problem. This is done in-place (without writing a new copy of the file) and is very quick.

Requirements:

· NET Framework 2.0

ElectricBlue is a JSR-82 compliant Java Bluetooth Stack Implementation over Windows.ElectricBlue is a 100% JSR-82 complaint stack, implementing the complete JSR-82 specification.

ElectricBlue bluetooth stack can be used to create application on J2SE without any need of additional libraries such as GCF.

ElectricBlue bluetooth stack uses the native Microsoft stack, and hence can be run on any Windows XP/Vista that has the Microsoft Bluetooth Stack Installed. (Usually this is included by default for all XP/Vista).

Limitations:

· 15 day trial version

Virtual Ring Buffer (VRB) is an implementation of a character FIFO ring buffer. Virtual Ring Buffer provides direct access to the buffer so the calling program can construct output data in place, or parse input data in place, without the extra step of copying data to or from a calling program provided buffer area.

In order to facilitate this direct access, VRB makes sure that all references to buffer locations for either output or input is always a single contiguous block of memory so that the calling program does not have to deal with split buffer spaces every time the cycling of data reaches the end of the buffer and wraps around to the beginning.

Thus, the calling program is free to use any number of tools available which do not have to be aware that they are operating directly in a ring buffer. In the latest version, VRB also provides a buffer overflow protection mechanism so that buffer overflow bugs force the program to be trapped by the operating system if accessed pointers wander beyond the range of address space managed by VRB. This feature can be disabled if desired, since it occupies 2 extra pages of address space.

VRB does all this without adding any copying overhead of its own. This ability is achieved by placing a mirror image memory map immediately after the buffer that is a reference to exactly the same memory as the buffer itself. Thus a reference to the memory location immediately past the last location in the buffer accesses the same physical RAM as the beginning of the buffer.

Thus a pointer near the end of the buffer that has a length that would otherwise have to wrap around will instead extend into the mirror image space to get the same result, but without any special handling by the program.

Installation:

First extract the source where you wish to store it. One of these commands might be used within the desired directory after the tar files has been downloaded there:

bunzip2 < vrb-0.5.0.tar.bz2 | tar -xpf -
gunzip < vrb-0.5.0.tar.gz | tar -xpf -

A subdirectory called vrb-0.5.0 is created. Execute these command to change into that directory and compile the source (changing the prefix if desired):

cd vrb-0.5.0
./Configure --prefix=/usr/local
make clean
make install

Note that unlike most other source packages using a configuration system, the configure command name is capitalized. The above commands will not install the man pages at this time. To install the man pages, simply copy them to the desired location, such as:

cp -p vrb/man/man3/*.3 /usr/local/man/man3

Usage:

VRBs basic approach designed into its API is that the calling program asks for the address and length of either the empty space where output data can be placed, or the data space where input data is present (previously placed there). These steps are implemented by macros for maximum speed, and are separate for address and length. The calling program then accesses that data directly in the buffer via that address (and length).

Once the data handling is complete, the calling program decides how much of that data it has inserted into empty space, or taken from data space, and calls VRB functions to indicate the which, which updates pointers (but does not copy any data). There are also functions available to assist in doing read/write I/O. Once the man pages are installed, the command man vrb is the starting point.

Whats New in This Release:

· A vrb_empty function was added.
· Dead code in vrb_take was cleaned up.
· A poll loop was implemented in vbuf. vbuf now uses getopt.
· Buffer size calculation and data type/format were fixed in vbuf.

Stack Shot description
Stack Shot takes a snap-shot of all the threads in the process Stack Shot application injects itself into a remote process and uses the Windows symbol engine to take a snap-shot of all the threads in the process.

The UI presents the call stacks of each thread and the associated source code (with syntax highlighting for C/C++ files) for each stack entry (symbols required).

When the Dock is just too small, or not quite the right place to store less frequently used applications or documents, Overflow is the solution.

Quickly launch applications you need to use on a semi-regular basis without wasting valuable space in the Dock. With just 2 clicks, you will have access to any application, document, or folder you want with Overflows fully customizable interface.

Overflow is an application designed to quickly launch applications, open documents, or access folders while keeping the size of your dock in check. Anything you want can be added to the Overflow interface, making it accessible through a few simple mouse clicks or keystrokes.

The interface is resizable, and fully customizable. Create separate categories for your applications, work files, games, or anything else you want to be able to access quickly. After using Overflow, we think youll find it just as indispensable as we do.

Limitations:

· 20 days trial.


Whats New in This Release:

· Fixed a problem with links to items sometimes being lost - including during Sparkle updates of applications in Overflow.
· Fixed a problem with keyboard commands not working the the first time Overflow is used after login.
· Fixed a bug that could cause the window to be incorrectly positioned if a second monitor was attached or removed.
· Fixed hot key combo display error.
· Email comments menu option now opens a new email in the users default email client instead of just using Apples Mail application.
· Increased the maximum number of rows and columns from 20 to 40.
· Command-up/down arrow now cycles through categories in a circular (Pac-Man world) fashion.
· Moving the mouse outside the window no longer changes the highlighted item.
· Fixed a bug that could cause two items to be added to the same spot.
· Applied oil to other minor squeaks.

Another freeware game written with VB.net compact framework for Windows Mobile devices.

Test your eye and thumb coordination with this game. Just stack those moving blocks and earn points!

This Beta version has 7 levels. The object of the game is to stack as many blocks moving around the screen as possible. Earn points as you do so.

NOTE: Action Button or Key#5 to stop those moving blocks.

All windows systems comes with a defenceless TCP/IP stack .

This tool tweaks your System and hardenes your systems TCP/IP stack against Denial of service Attacks (DOS) . Tested on XP 2000 and 2003 servers. Does not have any effect on other windows systems

BitNami Joomla Stack description
An easy-to-install distribution of Joomla!, MySQL, PHP, and Apache. BitNami Joomla! stack is an easy-to-install distribution of the Joomla! CMS software. The application includes ready-to-run, pre-configured versions of MySQL, Apache and PP so you can get an running installation of Joomla in a matter of minutes..

Here are some key features of "BitNami Joomla Stack":

· Easy to Install
BitNami Stacks are built with one goal in mind: to make it as easy as
possible to install open source software. Our installers completely automate
the process of installing and configuring all of the software included in
each Stack, so you can have everything up and running in just a few clicks.

· Independent
BitNami Stacks are completely self-contained, and therefore do not interfere
with any software already installed on your system. For example, you can
upgrade your systems MySQL or Apache without fear of breaking your
BitNami Stack.

· Integrated
By the time you click the finish button on the installer, the whole stack will be integrated, configured and ready to go.

· Relocatable
BitNami Stacks can be installed in any directory. This allows you to have multiple instances of the same stack, without them interfering with each other.


Requirements:

· Intel x86 or compatible processor
· Minimum of 256 MB RAM
· Minimum of 150 MB hard drive space
· TCP/IP protocol support