"Client for Remote Administrator" - powerful wrapper for Remote Administrator v 2.1

If you are the system administrator or member of support team - then "Client for Remote Administrator" can interest you.

=== What is the Remote Administrator? Radmin ( www.radmin.com ) is an award-winning remote control program that

enables you to work on one or more remote computers from your own.

It is a complete remote control solution with all key features such as File Transfer, NT security,

Telnet and Multilanguage support included.

=== What is the "Client for Remote Administrator" ?

Those who is already familiar with program Remote Administrator, know that its address book is not too convenient for

work with a plenty of computers, and program feature set is not too big.

"Client for Remote Administrator" lifts you on a new level of the network management,

where your network consists of thousand computers, adding to standard functionality of the RAdmin the following functions:

- storage of connections in folders of any level of nesting

- connections layout on a "map" - on a floor or network plan

- polling connections (ping and check RAdmin existence)

- storage of passwords for connections and their automatic input on demand

- remote install, setup and control of RAdmin server

- scanning of a local network for new computers both with RAdmin and without it

- and many others...

See more at http://www.volmsoft.com/radminclient_c_e.html

BrowseGate3 is an all new and very powerful, yet low cost NAT/Proxy/Firewall system designed to work in any network environment from the 2 PC Home network right through to the the largest business network.

It offers automatic on-demand Internet access to all network users via a single PC and can be used with modems, ISDN, ADSL, cable modems or other fixed connections. BrowseGate can be installed on any W95/98/ME/W2K or NT4 PC and does not require a dedicated machine for the smaller network installations. Under W2K and NT4 BrowseGate3 does of course run as a service.

BrowseGate 3 offers full NAT connectivity, plus Port address translation (PAT) a full caching web proxy for HTTP and HTTPS and also a SOCKS5 proxy. It even has it's own built-in caching DNS server, DHCP server, and fully configurable "Stealth" firewall to protect your network from illegal intrusions.

In addition to all the above, it offers has a powerful rules system, a Blacklist system for both web sites and user specified 'Words' and a web site limiting system.

2 user BrowseGate3 (Lite) is totally FREE!

3 user BrowseGate3 is only $44.95

4 user BrowseGate3 is only $89.95

5 user BrowseGate3 starter system is only $114.95.

More users (in blocks of 5) can be added to the BrowseGate system at any time for a small incremental cost.

IM+® Mobile Instant Messenger is a complete messaging solution that allows users to exchange instant messages within the most popular IM systems ( MSN®, Yahoo!®, AOL™, ICQ®, Jabber® and Google® Talk ) between mobile devices and PCs in real-time. IM+ users can use the same accounts on mobile devices and PC regardless of changing mobile operator - its very convenient for using in business trips. "IM+ is the best mobile application in the world!" , Connect Magazine 2/2005 tests. Best Software Awards 2006 Winner in Chat and Messaging Category . MSN, Yahoo!, AOL, ICQ, Jabber and Google Talk in one client. Direct and simultaneous connection to all supported IM systems. Mobile-to-Mobile and Mobile-to-PC real-time communication. No cost per message, only standard payment for wireless data transfer. 7-Day Free Trial. IM+ makes direct connection to the supported services, without any "gate" in the middle. Its very important; because it means that you connected to your favourite services as a full rights user and get all the messages and events immediately just as if you were connected with the standard client. Configurable notifications. IM+ keeps the contact list information on the respective servers. So, IM+ and your convenient desktop client always use just the same contact list. E.g if you add new buddy to your contact list with IM+, you will see this user in your contact list when you connect with your desktop client next time. Simultaneous connection to all selected systems. Custom presence status for MSN, AOL, Yahoo!, Jabber, Google Talk. Autoconnect after phone call. Group mode support. SSL Support for Jabber service. T9 option in dialogs to input text. Friendly User Interface in English, German, Italian, French and Russian . Exchanging messages in any language installed on device. Ke...

Cache Monitor is the SQL development tool designed for InterSystems database Cache. It supports developers with features, like: Advanced SQL Query Editor,Cache-SQL Syntax highlighting,SQL Code completion,SQL History buffer for executed SQL commands,SQL Code formatting,Graphical SQL execution plan and more.

You see the process ID (PID) from your connection on the Tabpane on every Query Analyzer. Code completion allows you to type a few characters and then display a list of context-sensitive possibilities to complete the text you are typing. Editor code completion brings up a list of Tables or Columns (also known as Intellisense). Code completion can be triggered by pressing [CTRL+SPACE] or by typing a hotchar or keyword, such as . or , in an SELECT list. After typing the keyword ON in a JOIN clause, Cach© Monitor displays foreign key join suggestion

Cache-SQL formatting can executed from context menu to make your code, or the code of others, much easier to read ("Format SQL"). The also supports of course: Undo/Redo and Search and Replace.

With Hyperlink navigation you can simple navigate from the editor to Tables metadata. When you presses the CTRL key and hovers the mouse cursor over a certain code element, the element is changed to a hyperlink. When you holds the CTRL key and clicks on the hyperlink, the "go to Tables metadata" action is performed.

The server edition was created specially for a server side processing, with user access management and command line. It also supports configuration as a shared network printer, Windows Terminal Server, and Citrix Metaframe environment. Users can send documents to a server printer and use all the advanced features: create PDF bookmarks, set document info, use preview without opening Acrobat, set PDF and viewer options, work with document stationary and security.

Easy Installation: It installs on a Windows server only, users use it as network printer. Users can add it with standard "add printer" windows wizard.

Easy Updates: Updating with a new versions saves a lot of work hours as it installs only on server. All users will use updated version once it is updated on server.

Any Windows version and connection type: Users can have any Windows version - 9x/2k/ME/NT/XP including laptops, Citrix clients, LAN or Wi-Fi connection.

Stand along application: Unlike most applications that require third part PS to PDF converters (like ghost), Right PDF Printer doesnt require any other software to create PDF. This makes it a best choic e for a corporate using.

User access management: the software allows create groups of users with special settings.

Command line: ommand line utilities makes it possible to get maximum for your business. Example:

printto.exe

This tool provides the advanced file printing functionality. It can be used to print files, folders (all printable files in a folder) or lists of files. This tool is not tied to Right PDF Printer by default, you may need to specify printer name explicitly. If printer name is not specified, default printer is used which may or may not be the Right PDF Printer.

Syntax:

/file fileName - print a file

/dir folderName - print all printable files in a folder

/list fileList - print a group of files listed in a simple text file

/printer printerName - use printerName printer instead of default printer

Library of SSIS tasks, components and scripts for handling Zip, GZip, BZip2, Tar archives, enhanced script reuse and secure internet communications. This is the current list of components:

Secure FTP Task - Securely send, receive, delete, or rename files, create and remove directories.

SSH Execute Task - Secure execution of shell commands on a remote SSH server.

Zip Task - Compression and decompression of Zip, GZip, BZip2, Unix, Tar archives.

Data Flow Task Plus - Extends Microsoft Data Flow task for greater usability and maintenance.

Script Task Plus - Extends Microsoft Script task for greater usability and maintenance.

Database Partitions Task - Handles the intricacies of partitioning allowing you to concentrate on your workflow.

Data Flow Source - Very fast, non-blocking, in-memory data read from another data flow.

Data Flow Destination - Exposes data from a data flow for in-memory read in another data flow.

SSH connection Manager - Secure connections with SSH-enabled server.

Package connection Manager - Get access to the current or different package at runtime.

The ultimate file sharing client for the Direct Connect Network, DC++ has fast established itself as the defacto standard client for Direct Connect. With features such as connecting to multiple Direct Connect hubs simultaneously, searching through multiple hubs, and incredibly easy-to-use interface, DC++is a joy to use. This version features faster hub connectivity, and fixes few bugs

Features:
· Multi-Hub connections · Minimize to tray · /commands · Logging · Display Joins & Parts · Confirm Exit · Resume check · Notepad · Favorites List · Sounds · No Advertisments · Disclude hidden files from share · Non-crappy interface · Not Visual Basic (!) · Menubar · Open Source · Firewall/Router Support · Auto-Connect · Search Spy · Multi-Kicking · Away Message.

This software does allow multiple users to update one calendar. Meaning the calendar belongs to everyone and everyone can read and write to it. OrgScheduler 1+1 gives you low cost network solution for sharing central planner simultaneously with everyone in your workgroup. You can even set network alarms to remind the whole office of an important event, like a meeting, in real-time. The program will show the complete list of active connections. Access to the OrgScheduler is controlled by the user security profiles. This is why information is always safe with OrgScheduler, whether it is implemented on a local network or on the Internet. The OrgScheduler 1+1 is built upon the interface options introduced in Microsoft Outlook. It includes importing from Outlook, exporting to Outlook, text, HTML, XML and Excel formats. It features different time display options in the day view, 149 event coloring types to indicate an events kind and importance, automatic hints that display an events start and end time together with its caption, multiple look and feel styles, event recurrence control. The program gives you a customizable Resource Navigator, new Date Navigator, a comprehensive reminder, control over the events overlapping and a mechanism for sharing events between an arbitrary number of different resources. You can format the calendar according to your regional settings. It provides many types of views: Day, Week, Month, Quarter, Year, All Days or Work Days only and vertical, horizontal timeline views. Also Print Designer system enables to you to design and print elegant reports..

MZL & Novatech TrafficStatistic makes it possible to view statistics on network usage and has its focus on payment relevent information. MZL & Novatech TrafficStatistic can also report, what the traffic was used for. It reads the users ethernet packages and allows to see the amount of traffic consumed as an icon in the system tray. So a user, who pays a volume based fee or has a tariff with a volume limit is always aware, how much volume is already used in a bill period. The user is able to see which hosts, services or ports were the top traffic consumers. MZL & Novatech TrafficStatistic works on IP packet level, therefore the user gets reports on all the traffic, regardless wether this traffic was made by a browser, a filesharing software or a secure connection. This versions new top feature is an editor for specification of local addresses and ports to be captured or not captured. This allows professionals to capture traffic to a proxy or VPN but exclude the rest of local traffic. MZL & Novatech TrafficStatistic can be useful for many diffrent people: - broadband (like DSL or cable) users with a volume metered (bandwidth limited) charge plan have always an eye on the currently accumulated consumed traffic. - internet users with a flatrate can see whether a cheaper metered charge plan might be appropriate for their consumption habbits - internet users are able to see, which services cause the most traffic - internet users are able to see, how much traffic was consumed with their top target hosts - operators of dedicated servers in a bandwidth metered charge plan get up-to-date statistics - network operators can see bandwidth consumption cut by host and service of all machines in the local net MZL & Novatech TrafficStatistic contains an IP detail record (IPDR) generator developed on basis of WinPCap and ACE. MZL & Novatech TrafficStatistic has be installed with administrator privilegues..

MarshallSoft SMTP/POP3 email component Xbase++ library (SEE4XB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4XB include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 (European character sets) and UTF-8 character coding. Get the number of messages on an email server. Forward email. Get the header lines from any email on the server, without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Decode email from a file. Can specify custom Content-Types; add custom header fields. Supports setting priority via X-Priority header field. Set return receipt; add TO, CC, BCC recipients. Dozens of switches to control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL (or SEE16.DLL) can be called from any supported language. Also use with Delphi, Visual C++, C/C++, .Net, PowerBASIC.,Visual FoxPro, Visual dBase, Visual Basic, VB.NET, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. Works with Win 95/98/Me/NT/2000/2003/XP. Works with all versions of Alaska Xbase++. Download free evaluation version from http://www.marshallsoft.com/see4xb.htm.

Toolbar Features: E-mails Notifier : Get alerted when new mails arives ( Supported For Yahoo, Hotmail, Gmail, Pop3 ). listen Internet Radio without slowingdown your internet connection . Weather Forecaster: Easy and graphicaly. Latest News: you can read latest news from ( BBC, Yahoo, MSN, GeoTV* And More ). *GeoTV is not fully Supported it will be Soon. Popup Blocker: It blocks unwanted popups. Alot of Links Added Weelky. No Toolbar Updates Needed it will Automaticaly updated without slowing down your internet. Installation: Connect to Internet Before Install the toolbar. It Configure Automaticaly for successful installation. .

SiteVault functions as an FTP files and MySql backup program that will allow you to browse your backups and restore them with ease. It will be an excellent FTP program that will allow you to maintain as many connections as you wish, copy between FTP servers, edit files remotely. It will do as many transfers as you need simultaneously. It will also double as an awesome file manager and computer explorer, its network browsing being the fastest weve seen so far. Itll help you keep your sites safe, your backups clean and your business running.

The program is meant for persons or organizations running one or multiple sites or web developers that need to have their work safe.

Requirements: Microsoft .NET Framework 1.1

Whats new in this version: December 22, 2006 Added support for Windows NT 5 behaving like Linux. Optimized certain .NET Framework 2.0 behaviours that decreased performance. Support for very large FTP folders. November 17, 2006 A new section with small but very useful

Library of SSIS tasks, components and scripts for handling Zip, GZip, BZip2, Tar archives, enhanced script reuse and secure internet communications. This is the current list of components:

Secure FTP Task - Securely send, receive, delete, or rename files, create and remove directories.
SSH Execute Task - Secure execution of shell commands on a remote SSH server.
Zip Task - Compression and decompression of Zip, GZip, BZip2, Unix, Tar archives.
Data Flow Task Plus - Extends Microsoft Data Flow task for greater usability and maintenance.
Script Task Plus - Extends Microsoft Script task for greater usability and maintenance.
Database Partitions Task - Handles the intricacies of partitioning allowing you to concentrate on your workflow.
PGP Task - Public-Private key encryption with OpenPGP standard.
Amazon S3 Task - Send, receive, delete and list files on Amazon S3 service.
Jabber Task - Bidirectional communication with Jabber clients.
Stream Task - Management of standard Stream objects.

Data Flow Source - Very fast, non-blocking, in-memory data read from another data flow.
Data Flow Destination - Exposes data from a data flow for in-memory read in another data flow.
Oracle Destination - Very fast bulk-load of data in Oracle table.
DB2 Destination - Very fast bulk-load of data in DB2 table.
Informix Destination - Very fast bulk-load of data in Informix table.
EDI Source - Reader for EDI format files.

SSH connection Manager - Secure connections with SSH-enabled server.
Package connection Manager - Get access to the current or different package at runtime.
Amazon S3 connection Manager - Connections with Amazon S3 service.
Jabber connection Manager - Connections with Jabber servers.
FTPS connection Manager - Secure connections with FTP over SSL server.

Requirements: Windows SQL Server SSIS 2005 2008

[ClosedTalk] is a secure VoIP solution for internet talk in total privacy. [ClosedTalk] provides user privacy, the confidence in the Identity of your talk partner and all other benefits of a VoIP solution. All data to establish a connection and the actual voice data are transmitted in an encrypted format. Unlike other VoIP solutions, [ClosedTalk] protect the communication through strong encryption technology, direct key exchange between the partners, and optional trustful authentication by digital certificates. Features include secure registration and activation, call connection using email address instead of telephone numbers, text chat, address book, call history, and ringtone management. By using the built-in sound system of the computer, [ClosedTalk] users communicate without the need of IP telephones. The solution incorporates top-end security technologies, such as ECC based Diffie-Hellman Key Generation Protocol to provide secure session keys, Elliptic-Curve cryptography, and a strong 256 Bit Advanced Encryption Standard to secure the voice and the management data. Making internet talk using [ClosedTalk] is easy as the caller only need the recipient?s email address. [ClosedTalk] does not need the old-fashioned telephone numbers. A gatekeeper service is provided by CE-Infosys to locate the public IP addresses of the communication partners on the Internet. Compared to a telephone communication, [ClosedTalk] provides highest sound quality as you need it to identify the voice of a partner or to listen to music. [ClosedTalk] is free for professional business and home uses. [ClosedTalk] users can enhance their communication productivity further by opting for a total solution which includes easy-to-use handsets, private gatekeeper for business users, and hotline support for a large user base. Free online support is provided at http://www.ce-infosys.com/cei_forum. More software updates and promotions are available at www.ce-infosys.com

Requirements: Built-in sound card, microphone & speaker connection

Whats new in this version: Supported Windows Vista

Navicat is an ideal solution for MySQL administration and development. This is an all-inclusive mysql front end provides a powerful graphical interface for databases management, development and maintenance. Easy installation
and intuitive interface make it an irreplaceable tool for mysql on the web or your local desktop. Navicat supports all verions of MySQL and let you converts Access to MySQL, MS SQL to MySQL, Excel to MySQL, synchronizes and backups database in a snap through helpful wizards.
Major features include Visual Query Builder, Import/ Export, Report Builder, Backup/ Restore, SSH Tunneling and Data Transfer. Navicat also supports to import data from ODBC, batch job scheduling (create schedule for Import/Export, Data Transfer and saved queries),
printing of table structure. It also includes a full featured graphical manager for setting the users and access privileges. Navicat supports HTTP connection in its latest version. Navicat is the number 1 MySQL database administration shareware in Download.com with over 290,000 downloads and 1,100,000 installations worldwide. Some of the users including Sony Music, Intel, Kodak, FedEx, KPMG Consulting, Ericsson,
Siemens AG, Yahoo!, NTT DoCoMo (Japan), Hitachi (Japan), Imation, Lexmark, Cisco Systems, RSA Security, Avis (Europe), U.S. Department of Energy, UPS, Disney, Oxford University, Harvard University, NASA Space Flight Center, MIT, Michigan State University, University of Michigan, ...
Navicat delivers a personal experience, simplifying the way you work. The program is available for Windows, Mac OS X and Linux and supports multiple languages.

DC++ is an open source client for the Direct Connect protocol. Direct Connect allows you to share files over the internet without restrictions or limits.

The client is completely free of advertisements and has a nice, easy to use interface.

Firewall and router support is integrated and its easy and convenient to use functionality like multi-hub connections, auto connections and resuming of downloads.

Features of DC++ include:

- Multi-Hub connections
- Minimize to tray
- /commands
- Logging
- Display Joins & Parts
- Confirm Exit
- Resume check
- Notepad
- Favorites List
- Sounds
- No Advertisments
- Disclude hidden files from share
- Non-crappy interface
- Not Visual Basic (!)
- Menubar
- Open Source
- Firewall/Router Support
- Auto-Connect
- Search Spy
- Multi-Kicking
- Away Message

Whats new in this version: Fixed a socket race condition leading to failing connections and crashes.

ApexDC++ is a Direct Connect client based on StrongDC++ and contains NO adware or spyware. The program has been modified for our communitys personal preference and has additional features over StrongDC++.

If you have any suggestions or feedback on our Apex DC++ client, then post it on the forums.

ApexDC++ is a DC++ client that allows you to share files over the internet.

ApexDC++ allows you to share files over the internet without restrictions or limits. Firewall and router support is integrated and its easy and convenient to use functionality like multi-hub connections, auto connections and resuming of downloads.

Here are some key features of "ApexDC++":

· Manual Connect Adress to public hublist window (mcdc++)
· Added saving of recent items to Quick Connect (mcdc++)
· Added command line option /q to allow running multiple instances (removes that confirmation dialog)
· Added some encoding stuff (czdc++)
· Cycle through tabs with Ctrl+W & Ctrl+E (Pothead)
· Password Protection for app exit
· Start Hubs as Minimized (majinsoftware)
· /u # from DC++ CVS
· Some more OMenu bars (some grantMenus)
· /filext command (idea from mcdc++)
· /yahoo and /y command (mcdc++)
· Added "Clear Chat" button to main chat - this is hidden by default (mcdc++)
· 3M and 300K connection speed tags
· Added tooltips to Winamp Toolbar
· Added preview of PM message when notifcation for PMs is enabled (mcdc++)
· Should work under Windows 95/98/2K by removing dependency on psapi.dll (Big Muscle)
· Program language (Since Big Muscles English is somewhat degraded)
· /r and /up commands (for /ratio and /uptime)
· Improved format of /ratio command to: "[User] ratio: 0.51 (Uploaded: 242,04 MB | Downloaded: 477,95 MB)"
· Improved sorting of favourite hubs
· Added show tabs on top option (mcdc++)
· /c command (/clear)
· Ability to clean screens for all users with /cls # or /clean # (Operators only). (mcdc++)
· TechGeeks Online added to favourites (Our support hub)