hiserial.sys serial port driver 1.5
HiSerial.sys Serial Port Driver 1.5
Boost your COM port's throughput. more>>
HiSerial.sys Serial Port Driver is a replacment for Microsoft's Serial.sys serial port driver. HiSerial.sys does enable high speed serial communication up to 921600 baud on both serial ports. The possibility of speeds higher than 115200 baud depends on the computers chipset. Version 1.5 may include unspecified updates, enhancements, or bug fixes.
HW Virtual Serial Port 2.5.10
HW VSP is a software tool, which adds to the operating system www.serial. more>> HW Virtual Serial Driver is primary designed for HW group devices, but it can be used for free as an universal driver to create a remote serial port,which redirects serial (RS232) data to the predefined TCP/IP address and port www.serial.
For special applications (ex. GPRS devices) is possible that the PC with the Virtual driver installed can work also as a server, so the connection might be initialized from the external device by sending any data to the remote port. The converter opens the connection with PC and sends the data to the virtual com. The whole situation is quite the same as with a normal serial port, but our device can be as far away as you want www.serial.
HW VSP can not be used to connect two physical ports of two PCs through the network (virtual null modem), because the HW VSP redirector works always with virtual serial ports.
If you are using the HW groups network devices with enabled NVT, you can change the Baud Rate, Parity and other communication properties (ex. binary inputs and outputs) during the normal communication using the RFC2217 standard, so you have a real remote port.<<less
VSPM-Virtual Serial Port 2.5
Create virtual serial port on pc.Map this VSP to TCP/IP or UDP. more>> Create virtual serial port on pc.Map this VSP to TCP/IP or UDP.
Use for Serial Server,GPRS/CDMA DTU,or other product
1.Support TCP/IPServer,Client or UDP broadcast mode.
2.Support error check(KeepALive),auto rety connect.
3.Multithreading.
4.Communication between the two VSP
5.Map PC hareware COM Port to TCP/IP
6.Run as Application or Service
7.Very low memory consume.
Create virtual serial port on pc.Map this VSP to TCP/IP or UDP.
Use for Serial Server,GPRS/CDMA DTU,or other product
1.Support TCP/IPServer,Client or UDP broadcast mode.
2.Support error check(KeepALive),auto rety connect.
3.Multithreading.
4.Communication between the two VSP
5.Map PC hareware COM Port to TCP/IP
6.Run as Application or Service
7.Very low memory consume.
VSPM is FREE WARE.<<less

Free Virtual Serial Ports Emulator 0.936
VSPE is intended to help software engineers and developers to create/debug/test applications that use serial ports. It is able to create various virtual devices to transmit/receive data, share physical serial port data for several apps, and so on. more>>
VSPE is intended to help software engineers and developers to create/debug/test applications that use serial ports. It is able to create various virtual devices to transmit/receive data. Unlike regular serial ports, virtual devices have special capabilities: the same device can be opened more than once. Using VSPE you can share physical serial port data between several programs, create virtual pipes, expose serial port to local network (via TCP protocol), create virtual serial port device pairs and so on.
Product key features:
- Virtual device: connector
- Virtual device: data splitter
- Virtual device: pair
- Mapper device
- User mode device: TcpServer
- User mode device: TcpClient
- User mode device: Serial Redirector
- User mode device: UdpManager
- User-mode device: Bridge
- Python scripting system
- x86 and x86_64 processor architecture support
- API for developers
- Embedded HTTP server
- Data monitoring
System Requirements: Windows NT/2000/XP/2003/Vista
Enhancements: - VSPE_API: updated header file (__cdecl specification) - Fixed fail on exit - Added Dutch language translation (thanks to Mathieu Fichefet) - Fixed bug in TcpClient: could not start without script file - Fixed fault on VSPE_API unitialization (The instruction referenced memory at "0x00000020")
<<less
/receive data, share physical serial port data for several apps, and so on. Free Virtual Serial ... physical serial port data between several programs, create virtual pipes, expose serial portLicense:Freeware
License:Freeware
License:Freeware
VSPE is intended to help software engineers and developers ... physical serial port data between several programs, create virtual pipes, expose serial portLicense:Freeware
License:Freeware
License:Freeware
ELTIMA Virtual Serial Port 4.5
ELTIMA Virtual Serial Port creates two pure virtual serial ports in your system which are virtually connected to each other more>> ELTIMA Virtual Serial Port creates two pure virtual serial ports in your system which are virtually connected to each other. You can transfer files or any other data between applications using virtual serial ports as if they were real serial ports.<<less
Bill Serial Port Monitor 3.0S
Bill Serial PortMonitor (RS-232 SPY Sniffer) more>> To monitor (bi-directional) Serial communication RS-232 between two devices without physical cable, you can use the freeware Bill Serial Monitor. This freeware enable you to view, log, test and analyse the activity of the serial RS-232 port. If you want to monitor the serial protocol of two different serial devices you can use our Protocol Analyser function. DSR, CTS, DTR and RTS can also be controlled..<<less
Free Serial Port Monitor 3.31
Free Serial Port Monitor, RS232 Com Software Sniffer and Communication Analyzer more>> Free software serial port monitor, Com Rs232 sniffer with communication packet data analyzer. This monitoring utility can spy, capture, view, analyze, test com ports activity performing com port connection and traffic analysis with data acquisition and control. You can use this system as device interface testing tool, modem data transfer viewer and so on.<<less
ELTIMA Shared Serial Port 2.0
ELTIMA Shared Serial Port: Shared Serial Ports is an advanced utility, the purpose of which is to share real serial ports between multiple applications in the way, that all applications will receive more>> ELTIMA Shared Serial Port: Shared Serial Ports is an advanced utility, the purpose of which is to share real serial ports between multiple applications in the way, that all applications will receive same data from real serial port simultaneously. It is achieved by creating virtual serial ports, which are same copies as real one. Each application will think that it is working with serial port in exclusive mode. All virtual serial ports will be able also to send data to real serial port. Also, you will be able to set permissions to read, write or change control lines state for every application separately.<<less
CH Gameport Device Drivers 1
Update Windows drivers for your CH Game Port devices. more>>
These are the newest CH Drivers for CH Game Port devices. These new drivers will work with the CH F-16 Combatstick, CH F-16 Flightstick, CH Fighterstick, CH Flight Sim Yoke PC, CH Flightstick Pro, CH FlightStick, CH GamePad, CH GameStick 14, CH GameStick 3D, CH GameStick, CH ProPedals, CH Racing Wheel, CH Virtual Pilot Pro, and CH Virtual Pilot, and Force FX.
The new CH Analog Drivers provide Windows XP and 2000 support for CH 15 pin game port legacy controllers. They also add more functionality for Windows 98 and Me. These drivers may also help with not connected, jittery response, and calibration issues caused by slow game ports. Version 1 may include unspecified updates, enhancements, or bug fixes.

Bill Redirect Serial COMPort to Keyboard 4.0C
No physical cable is required (Spy COMM Sniffer monitor and debug) more>> Resident Tray System software for barcode scanner or other serial data capture devices that have a standard RS232 interface. The program will redirect serial inputs from COM ports to keyboard buffer on your computer, as if the data were directly typed in from the keyboard. Features include: Debugger, run in System Tray, Configuration protected by PASSWORD, Macro Commands, Search and replace characters, can remove specific ASCII Characters. Redirects serial inputs (data) to any applications (POS, database, Excel, Word, or your own customized the software).<<less
License:Adware
Resident Tray System software for barcode scanner or ... The program will redirect serial inputs from COM ports to keyboard buffer on your computer, asSerial Receptor 1.4.3
This software will enable you to replace your serial printer. more>> This software will enable you to replace your serial printer.
Serial Receptor is a easy tool to capture all data on your serial ports.
With this tool, its easy to replace your old on line serial printer by a simple PC and save automatically all your data into a rotating buffer file.
Serial Receptor is a software that allows you to replace your serial printer.
If your printer is connected to the parallel port, there exists in the trade parallel/serial converters.
Enhancements:
- You can setup timestamp option to add date/time when data received.

Bill SERIAL MONITOR 3.0a
Bill SERIAL MONITOR (RS-232 SPY/Sniffer) 3.0a more>> Use BillSerialMonitor for monitoring bi-directional communications between two devices RS-232 (*** No physical cable is required !). Bill Serial Monitor is a monitoring application, which allows you to view, test, log, and analyze serial port activities. Protocol Analyzer function allows you to monitor the serial protocol between two different serial devices. It is useful for troubleshooting, developing and implementing serial protocols, reverse-engineering serial protocols and testing software. (Freeware)<<less
SerialTerm 1.5.17
SerialTerm is a program designed for PC to serial device interfacing and more>>
debugging. With SerialTerm you can perform design time tests and troubleshooting of your 8051 based projects and other serial devices.
SerialTerm application comes with eight pre-defined outputs which let you send data packets to connected serial port with a single click. An especial Hex Text Processor lets you send any binary characters to serial port from the standard input text boxes.
You can also use the file up loader to send text or binary files to your serial devices such as MCU programmers, 8051 based Single Board Computers and mini LCD terminals.
SerialTerm is a helpful tool for 8051 assembly programmers, electronics
professionals, hardware engineers, or anyone who needs a handy tool to
develop, test and manage their serial devices.
Serial ToolKit for 4D 1.0.2
Serial port management plugin for 4th Dimension more>> Serial ToolKit (STK) is a 4D plug-in which gives a better serial port support inside 4th Dimensions programming language.
Serial ToolKit contains a dozen of commands allowing to get information regarding available serial ports, open, close, configure a port, send and receive data, etc.
<<less
Hercules Setup Utility 3.1.0
Hercules SETUP utility is useful serial port terminal. more>> Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal) , UDP/IP terminal and TCP/IP Client Server terminal. It was created for HW group internal use only, but today its includes many functions in one utility and its Freeware! With our original devices (Serial/Ethernet Converter, RS-232/Ethernet Buffer or I/O Controller) it can be used for the UDP Config. Hercules is great utility if you are working with the serial and Ethernet devices & interfaces.
General useful parts :
Serial port terminal (COM5 and higher support)
TCP/IP Client terminal (similar to "Telnet")
TCP/IP Server "terminal"
UDP "terminal"
For HW group devices only :
UDP Config utility (IP, Port, MASK, GW setting)
Test mode (TCP/IP terminal with TEA authorization support and NVT (Network virtual Terminal) parser for remote I/O pins control.
The Hercules SETUP is compatible with our free Virtual Serial Port, you can debug applications connected to remote serial port using Windows 2000 or higher.
Basic FeaturesAll basic TCP and UDP utilities in one file, no installation required (just one .EXE file)
Implemented Serial Port Terminal is working with the Virtual Serial Ports (COM12 for example). You can check and control all serial port lines (CTS, RTS, DTR, DSR, RI, CD)
Simple TCP client (like the Hyperterminal) with the TEA support, view format, file transfers, macros..
Easy to use TCP Server with the TEA support, view format, file transfers, macros..
Hercules contains simple UDP/IP "Terminal" with view formats, echo, file transfers, macros..
Support the NVT (Network Virtual Terminal) in the Test mode tab, as like as NVT debuging features..
Using Telnet extended with NVT allows serial port configuration (RFC2217), device identification, confirmation of data sequence, etc.
Its FREEWARE you can use and share this software free - check the licence!<<less
