Free ivr software for windows

Yate can be used as a:
* VoIP server
* VoIP client
* VoIP to PSTN gateway
* PC2Phone and Phone2PC gateway
* H.323 gatekeeper
* H.323 multiple endpoint server
* H.323SIP Proxy
* SIP session border controller
* SIP router
* SIP registration server
* IAX server and/or client
* IP Telephony server and/or client
* Call center server
* IVR engine
* Prepaid and/or postpaid cards system

TERAVoice Server 2004 - a high-performance telephony platform TERAVoice software can increase productivity by optimizing telephony communications.you will never miss a call and get instantly notified on your mobile phone, on your pager or via e-mail. Increase customer satisfaction by optimizing hotlines with voice menus and managed waiting queues and create custom IVR solutions in order to cut down cost for call agents.
With its MMC-based management console, TERAVoice can be administered and monitored easily, even from remote computers. For smaller configurations no dedicated server is needed, simply plug-in an appropriate analog or ISDN telephony board into your file-server and get your telephony solution started at very low cost, while maintaining scaleability through being able to switch to a dedicated system for higher loads later.
Through its integrated TAPI and CAPI interfaces TERAVoice is able to support a wide range of telephony hardware starting from simple voice modem up to Multi-PRI ISDN boards or professional TAPI-based telephony boards even in mixed configurations.
TERAVoice combines the ease-of-use of simple voicemail solutions and the flexibility of programmable systems. Voice mailboxes, voice menus and several other call handlers can be created with just a few mouse-clicks.
At the same time TERAVoice provides an easy to understand programming interface for creation of custom Interactive Voice Response (IVR) application. Through its integrated scripting capabilities, building custom solutions is as easy as creating ASP (Active Server Pages) web pages.
TERAVoice is compatible with all SMTP-based messaging systems and mail servers for delivering voice messages and call notifications. Additionally subscribers can be notified via SMS or pager messages and by the MWI (Message Waiting Indicator) of their PBX telephones. A windows client tool for notification and mailbox configuration is available as well.
Main features:
General
TERAVoice is a high-performance multi-threaded windows system-service offering a unique and scalable telephony platform. The system can be easily expanded by purchasing additional licenses for lines and mailboxes.
Hardware Support
TERAVoice supports a broad range of telephony hardware and three CAPI based VoIP (H.323 and SIP) stacks. The supported hardware can be asp:Panelided in three basic categories:
- TAPI based hardware
- CAPI based hardware
- Voice Modems
More information about the supported brands and devices can be found on our Hardware Compatibility List. Devices can be bundled into Device Groups to simplify management and administration.
Routing
All incoming calls are handled by Call Handlers which offer specific call processing capabilities. The call handler that is designated to handle a specified call is determined by its Routing Parameters. TERAVoice offers four types of routing parameters:
- Device Routing
This type of routing assigns the appropriate call handler depending an the telephony device or line on which the call occurs
- DTMF Routing
Most analog PBX systems can signal the station number from which a current call has been redirected to the telephony server by transmitting DTMF tones during the first few seconds of the call. This technique is also referred to as "In-band signaling"
- MSN Routing (Routing by Called ID)
This type of routing is typically used in digital networks. Telephony hardware can service different extensions (called MSNs - multi subscriber numbers in ISDN) on a single physical line. This MSN which is transmitted as the Called ID on TAPI devices can be used to assign a call to a distinct Call Handler
- Redirector Routing
This type of routing is very often available in digital networks as well. If a call which is targeted to a certain extension is redirected to the telephony server (either by an explicit redirection the user has set on his telephone or by implicit redirection through PBX ringing groups) the PBX often transmits the original call target as the Redirecting Party Number. This is an excellent option for easy mailbox assignment in digital networks.
Call Handlers
The following types of call handlers are available in TERAVoice Server 2004:
- Voice Mailbox
- Voice Menu
- IVR Modules
- H.323 Target (VoIP)
- Scheduler
- Waiting Queue
- Music On Hold
- Remote Control
Call Transfer
TERAVoice supports all kinds of Call Transfer as long as the transfer method is supported by the hardware device:
- Attended Call Transfer
- Unattended Call Transfer
- 3-Party Conference
- In ISDN networks with CAPI boards: ECT-E and ECT-I
- Software Bridging
Software bridging can transfer a call between different networks or within one network in case the hardware, network or PBX does not support call transfer. Software bridging also works with VoIP targets.
Notification
Users can be notified about new calls or new messages with various options:
- E-mail notification of new messages
An e-mail message is sent to the configured e-mail address each time a new message is recorded. An audio file of the message is attached to the e-mail
- E-Mail notification of new calls
For those calls where the caller does not leave a message a notification e-mail can be sent to a different e-mail address. This allows the subscriber to permanently keep up with all received calls. This function can be also used for creating call-logs in the messaging system. As an example a MS Exchange Public Folders e-mail address can be used in order to create a call log in this folder.
- SMS or pager notification
This method allows receiving notification messages on your mobile phone or pager either for all calls or only for those with a recorded message. The sender number for SMS messages can be set to the number of a remote control Call Handler for quick dialing into the remote control box
- MWI notification
Many PBX systems allow signaling new messages via the MWI-Indicator (Message Waiting Indicator) on their PBX telephones. This is done by dialing a certain special number for switching on and off.
- TERAVoice Client Application
TERAVoice comes with a small Windows client application which loads in to the system tray. New messages are indicated via the tray icon and can be listened locally via the computer systems speakers. This requires Windows network access to the TERAVoice server.
Reverse Number Lookup Plugins
TERAVoice comes with a plugin architecture which allows to do a reverse lookup on incoming calls. Currently an Active Directory plugin is delivered with TERAVoice, more plugins for MS Exchange contacts, general database lookup, general LDAP lookup and some phone number CD will be provided.
Text-To-Speech (TTS)
Instead of playing voice prompts TERAVoice can also play text messages that are synthesized by a Text-To-Speech engine. TERAVoice supports all Microsoft SAPI 5.1 compatible TTS engines.
Administration and monitoring
TERAVoice can be administered and monitored locally and from remote systems. Administration is implemented as a Snap In for the Microsoft Management Console (MMC) and can be used like any other Windows administration tool.
An integrated monitor shows current activity with detailed call status information for all lines. Central logs for handled calls, informational and error messages are provided as well. TERAVoice can log information to Windows EventLog, TERAVoice internal log as well as a text file and even sent error messages by e-mail to the administrators e-mail address.
Language support
TERAVoice currently offers support for both English and German language for windows user interface, documentation and all audio files. User interface language is depending on the current language setting of the currently installed operating system.
The audio interface language of system audio messages can be configured on a per-mailbox basis, in such way that user A can get English language remote control menu while user B can listen to the same menu message in German.
Further languages are planned and will become available for download as soon as available. Other languages for system voice messages can also be created by the customer.
Language support for voice menus or IVR modules can be implemented as desired.
Supported Standard and Technologies
TERAVoice supports the following standards and technologies:
- TAPI - Microsoft Telephony API - www.microsoft.com
- CAPI - Common ISDN API - www.capi.org
- ISDN - Integrated Services Digital Network - www.itu.int
- POTS - Analog Telephony Networks
- H.323 - Voice over IP protocol - www.itu.int
- UCP - Universal Computer Protocol (for sending SMS messages)
- TAP - Telelocator Allocator Protocol (for sending SMS and pager messages)
- SAPI - Microsoft Speech API - www.microsoft.com/speech
- COM - Component Object Model - www.microsoft.com/com
- SMTP - Simple Mail Transfer Protocol - www.ietf.org
Version restrictions:
- A short (5s) commercial message is played back after connect. The Free version allows 1 line and up to 5 Call Handlers

Voice Web Studio 1.1.1 is developed to be a useful and handy product for Macromedia Dreamweaver MX, which enables you to visually create and implement speech-enabled Web and telephone (IVR/VRU) applications based on SALT 1.0. Add speech recognition and text-to-speech (TTS) to your Web pages through Macromedia Dreamweaver MX. Voice Web Studio enables you to use your voice to navigate Web pages and to enter content onscreen.

You can deploy your pages on wireless devices, handhelds, telephones, and Internet kiosks. It offers features that let you speak back to the Web page and navigate it without using the mouse or keyboard. This extension suite is a tool for Speech Application Language Tags (SALT) and for Microsoft Internet Explorer 6.0 or later. It does not yet support VoiceXML.