pulldown
DGPulldown 1.0.11
MPEG2 video elementary stream,change it to a higher legal MPEG output frame rate more>> This program takes a progressive MPEG2 video elementary stream, and applies pulldown flags to change it to a higher legal MPEG2 output frame rate. It also allows changing/correction of timecodes.
DGPulldown is useful for applying traditional 3:2 pulldown. It is also useful for converting 25fps PAL progressive material to NTSC. It allows you to encode your movie to MPEG2 at 25fps using progressive encoding. This saves a lot of bits and therefore allows for much better quality with the same bit budget. Also, compared to methods that first slow down the video and then apply 3:2 pulldown, there is no need to process the audio.
The great idea for using irregular pulldown patterns for PAL to NTSC conversion was first suggested by Xesdeeni. An extensive discussion of the theory and usage of DGPulldown can be found at the Doom9 forum:
A typical workflow is as follows (assumes you are starting with PAL source material):
Demux the video and audio streams.
If the video is interlaced, deinterlace it to make it progressive. If it is already progressive, skip this step.
Resize the video to 720x480.
Encode the video to MPEG2 at 25fps progressive.
Run DGPulldown on the video MPEG2 stream to flag it up to 29.97fps (using the 25fps --> 29.97fps conversion).
Mux the audio and video into a program stream, or author a DVD using the audio and video streams.
DGPulldown works by altering the MPEG2 RFF/TFF flags to increase the number of display frames to exactly the right number to generate the specified output frame rate during playback.
The latest released version is 1.0.11. This version fixes the drop frame option. The option was ignored and so only the auto mode worked. It was not possible to enable or disable drop frame using the 3-state checkbox.<<less
Donald A. Graft - Takes a progressive MPEG2 video elementary stream, and applies pulldown flags to change it to a different legal MPEG2 frame rate. DGPulldown. Takes a progressiveWait And Pull 1.01
Wait And Pull application was designed to automatically run pulldown.exe when MPEG encoding is complete more>>
Wait And Pull application was designed to automatically run pulldown.exe when MPEG encoding is complete.
System requirements:
- CCE encoding software installed
Marc Van Houwelingen - Automatically runs pulldown when MPEG encoding complete. Wait And Pull. Another tool for DVD re-encoders. AutomaticallyLiner 1.0
change line-endings in text files more>> Liner is a small utility application that is designed to quickly change line-endings in text files. Its window features a drop area "Drop files here..." where you can drop files or folder. In case a folder is dropped all files in all subfolders in that folder are processed. A pulldown menu or checkboxes allow setting up to what the line-endings should be changed to. You can restrict what files are touched by checking the "Use Extensions" checkbox. If selected only files with extensions listed are touched. Please note that the email address on the About box is out-of-date. use info@purplecat.be instead.<<less
SVCDbuilder 2.2.4.13
SVCDbuilder - A program for quick and easy conversion of DVD, AVI, AVS and WMV files to SuperVCD, xSVCD or CVD discs more>>
One of the most significant advantages of SVCDbuilder over similar programs is that it doesnt create one big MPEG file to be then split into parts (CDs), but creates one file for each CD directly.
This allows the bitrate to be optimized for each CD, with professional style overlap and AV fades in the beginning and end of each CD.
Features:
- Easy to use, wizard-like user friendly interface
- Automatic splitting of the movie into 1-3 CDs
- Visual adjustment of split and cut points
- Source file preview
- AVS script file preview
- AVS script customization
- One-click setting of Fade in and Fade out for each disc
- Automatic bitrate calculation
- Audio track language selection
- Audio mode and bitrate selection
- Ability to skip processes (Pulldown, Mux, VideoAudio encoding etc...)
- Automatic chapter extraction and creation
- Permanent subtitles support
- Ability to add a logo video clip, "change cd" and final still image to the disc
- CD Covers and chapter list can added to the "ADDONS" directory on the CD
- Detailed logging
- Batch processing
- Works with CinemaCraft encoder SP 2.50...2.67 and Canopus ProCoder 1...2
- A ready to use bincue CD image is created after conversion
- Automatic PC shutdown
VirtualDub 1.6.9.23604
A pre- and -post video processor with many capabilities. more>> There are lots of programs that let you "edit" video. And yet, theyre frustratingly complex for some of the simplest tasks. VirtualDub isnt an editor application; its a pre- and post-processor that works as a valuable companion to one:
Reads and writes AVI2 (OpenDML) and multi-segment AVI clips.
Integrated MPEG-1 and Motion-JPEG decoders. Remove and replace audio tracks without touching the video. Extensive video filter set, including blur, sharpen, emboss, smooth, 3x3 convolution, flip, resize rotate, brightness/contrast, levels, deinterlace, and threshold. Bilinear and bicubic resampling -- no blocky resizes or rotates here. Decompress and recompress both audio and video. Remove segments of a video clip and save the rest, without recompressing. Adjust frame rate, decimate frames, and 3:2 pulldown removal. Preview the results, with live audio.
You can take a captured clip, trim the ends, clean up some of the noise, convert it to the proper frame size, and write out a better one. Dont see a video filter you want? Write your own, with the filter SDK.
Build 23604 (1.6.9, stable): [July 10, 2005]
[bugs fixed]
* Extended workaround for Huffyuv joining problems to capture mode
(pre-zeroing format block).
* Hex editor would warp to a random location when using the mouse wheel for
the first time.
* Currently displayed frame was not updated after a reload (F2).
* Fixed errors when opening YCbCr (YUV) videos that had nonstandard bit
depth or image size values in the frame header.
* YV16 input is now supported; previously it could be written but not
re-read.
[regressions fixed]
* Fixed sporadic audio compression errors at end of render.<<less
DVD2SVCD 1.2.3 Build 1
DVD2SVCD - Completely automated frontend for converting DVD, PVA, and AVI files to SVCD more>>
Completely automated means that all you have to do is just select the file or dvd you want converted and hit GO, everything else is taken care of by the frontend.
You will find this software to be the single most advanced software to Encode your DVD, DVB, VOB, MPEG or AVI into DVD, SVCD or VCD. All done with a couple of clicks with the mouse. Perfect for both the beginner and advanced user. Welcome to the digital world!
All of you who have used CCE previously or created an SVCD with another tool than FlaskMpeg and the bbMPEG plugin know that SVCD creation isnt exactly fun as it requires many different tools and many steps.
To cut a long story short: All your cries for help have been heard and DVD2SVCD is the program for you if you simply like to enter the number of CDs, which audio and subtitle streams you want, then enter the DVD in the drive, press a button and when you come back a few hours later you have the CD images ready to be burned.
Lately support for PVA (digital broadcast) and AVI input has been added, along with TMPG support.
DVD2SVCD combines many programs together: vStrip to rip the DVD (best ripper around), DVD2AVI to create a DVD2AVI project, Mpeg2dec and Avisynth for the fastest frameserving from DVD2AVI to CCE, BeSweet for high quality audio processing, video encoding in CCE, TMPG or Procoder, then applying pulldown flag in case of an NTSC video, multiplexing video and audio using bbMPEG and finally creating SVCD images for burning using VCDImager.
Furthermore DVD2SVCD supports multiple audio streams and selectable subtitles (the latter only works on standalone players).
The program comes as a complete package that contains all the free softwares required. You only have to add CCE SP or TMPG.
QuantDump 1.1
Dumps the quant matrices from an MPEG2 elementary stream or program stream to a log file or to the standard output. more>>
Run QuantDump from a DOS window or by executing it programmatically from your application.
Usage: quantdump infile [outfile]
If outfile is omitted, the output goes to the standard output, otherwise it goes to the specified file.
Note that only stream events that change the active quant matrices are logged. So, for example, if you have the same matrices sent with each sequence header, only the first will be logged (because it changes the default matrices).
Also note that the frame numbering refers to the encoded frame numbers
and not the display frame numbers. These two are different when pulldown is present. In that case, you can use a DGIndex project with "Ignore Pulldown Flags" to serve the video such that the display frame numbers correspond to the encoded frame numbering.
AutoMKV 0.95c
A light version of MKVmagic that supports various input and output formats more>> A light version of MKVmagic that supports various input and output formats
Light version of MkvMagic, aimed to newby (and not so newby) user.
Note - for use NERO AAC you must put your copy of neroAacEnc.exe into exebesweet folder
HOW to update: download full package, then replace automkv.exe with latest version
Main features:
- support input: mpeg/vob/ts, dv2, avs, m1v, m2v
- support output: mkv, mp4, avi
- support codec: xvid ( using Teegedeck profiles), x264 (using Shartooth profile)
- support audio: nero/winamp/lame/ogg
- support subs: up 2 tracks
- support filter/deinterlace/custom avs
- support custom matrix
- support custom autoresize
- support custom crop and resize
- support 1 / 2 pass encoding with specified bitrate
- support custom x264/xvid profiles
- support job queue
- support for autoloading vob files (just click on first vob to process)
- support ifo parsing
- support custom command line parameters
- support encrusted subtitle
- support command line input file
- support drag&drop input file
- support force itu resize
- support episodic dvd
- support anamorphic encoding
- support to add custom last avs script
- support to save default config
- support command line configuration file
- support conditional 2 pass encoding
- support custom AR
AutoMKV supports the following video sources for input:
- DVD (as IFOs and VOBs on HD or on DVD Drive)
- MPEG-2 (and all its wide family like: VOB/TS/M2V...)
- MPEG-4 (DivX, Xvid, H.264, VC1...)
- WMV
- Anything else that can be played by Windows Media Player
AutoMKV supports the following Video codecs for output:
- XVID
- H.264
- WMV
- AutoMKV supports the following Media Containers:
- Matroska
- MP4
- WMV
- AVI / DIVX
Enhancements:
- ADDED: support for , , , take as reference the PS3_41_ECS3.xml, pulldown value can be any integer. Set 0 for disabling. (suggestion by survivant001)
- FIXED: Typos (AQ strenght -> AQ strength) (thanks to Encoder888)
- FIXED: Maximum AQ Strength is 2.0 (and so you can put 20 for 2.0)(thanks to Encoder888)
- FIXED: Deinterlacer routine test now is running minimized and at idle priority
- FIXED: Computing movie parameters now run at idle priority
- FIXED: Some tweak to ffmpeg.exe usage
DIKO Free 2.42a / 2.40
Automates conversion to DVD/SVCD using advanced BVCD methods. more>> Automates conversion to DVD/SVCD using advanced BVCD methods.
DIKO is an automation tool to convert video to DVD and SVCD that allows to reach up to 6 hours in 1 DVD-R or 2 hours in 1 SVCD. For each step of this conversion, theres an optimal way to do it and a optimal software (generally freeware) to use.
But using all softwares and learning each step to do an optimal conversion is a time consuming task in two aspects: you have to spend a lot of time learning to use the tools and you have to be around to run each tool.
DIKO is like a super speciallized robot that does the all the calculations, decides what is best qualitywise and gives the right orders to all tools, aiming to get excellent video quality. DIKO is 100% freeware, and everything it needs is also freeware and bundled in the install package.
Main features:
- Encoding via One Pass VBR Size prediction fully integrated, using CinemaCraft Encoder, AQE or TMPGEnc, ou using 1 or 2 Pass VBR throught FreeEnc (bundled in DIKO installation package).
- Does automatically all bitrate calculation needed.
- Convert audio to 48000 automatically if needed.
- Do automatically framerate conversions from 23.976 to 25 fps and 25 fps to 23.976, including audio and subtitles. This feature also works with 5.1 audio.
- Automatic authoring with user-created menu via linux ported DVDAuthor or leave video audio and subs ready to be imported to other authoring packages.
- Automatic DVD image creating via MKISOFS and burning viaIMGBurn if dvdauthor authoring is selected.
- Creates switchable subtitles from commom srt and sub files.
- Join subtitles for originally 2-CD DivX movies on the fly.
- Stops if Q Factor is too low, avoiding bad quality encodes.
- Automatically checks and fixes AC3 errors via AC3FIX
- Enables pulldown flag via Pulldown.exe automatically.
- It can fully work in background.
- Do AC3 encoding via SoftEncode or MP2 encoding via BeSweet
- Full avisynth script support, comes with latest Dialhot Script V4 for DivX.
- Takes care of the annoying Softencode dying bug.
- DVD support via D2V projects and Full DVD support with DVDDecrypter ripping in DIKO Gold.
- Crash Recovery
Enhancements:
- AVI2WAV command-line mistaken again (Mrmscorp)
- Extracting twice the same track in dual audio (Mrmscorp)
Automatically checks and fixes AC3 errors via AC3FIX - Enables pulldown flag via Pulldown.exe automatically. - It can fully work in background. - Do AC3 encoding via SoftEncode or MP2 encodingDHTML Menu Builder DE 4.20.010
creates HTML pulldown menus more>> DHTML Menu Builder DE, for short, is a special version of DHTML Menu Builder designed for advanced users who need to be able to modify the menus programmatically.<<less
MediaInfo 0.7.17
MediaInfo is designed to be an effective and useful tool which supplies technical and tag information about a video or audio files. more>>
MediaInfo 0.7.17 is designed to be an effective and useful tool which supplies technical and tag information about a video or audio files. Example of information are codec, bit rate, frames per second, width, height, count of channels, duration, title, author, language of subtitles, name of chapters.
Multiple means to view information (text, sheet, tree, and HTML) and you can customize these views. Exporting possibilities for text, CSV, HTM, Graphical Interface, or Command Line are available. Supported formats include MKV, OGM, AVI, MPEG1, MPEG2, MPEG4, DVD, OGG, MP3, WAV, RA, AC3, DTS, AAC, M4A, AU, and AIFF.
Version 0.7.16 adds more information for Avid DV streams, more complete parsing (raw stream) of files with compressed headers, displaying the original framerate for streams with 2:3 pulldown and Handling of Mutual Excluded streams.
DoItFast4U 1.4.0
DoItFast4U - The BEST tool available for automating the process of demuxing your assets from your DVD VTS sets more>>
If youve worked on many projects at all, you know by now that a lot of it is a manual process of writing scripts, renaming, demuxing, etc. (Important: Read Step 1 of the Guide or this program may not function correctly for you!)
Another question you may be wondering: "What makes this tool so great?" In the past Id say because I, the author, am one of you. I back up my DVDs and uses methods everyone else uses too. Im not a programmer who knows code but no real idea of how to make DVD-r. I use this tool daily, and strive to make it the best possible tool to fulfill my needs, which means you benefit too!
Main features:
- Demuxing an entire VTS by VobID, including subtitles (first program ever to do this that were aware of!)
- Demuxing an entire VTS using .ifo/.vob files that are on the hard drive. (Admittedly slow, but it WORKS!) Can demux by Vob ID/Cell ID now!
- All options are remembered for each VTS now. The settings are dependent on VTS. Every VTS is independent configurable, to give you the maximum control of the output!
- Will automatically create directories for you if you like your VTSes in separate directories.
- Built-in DVDCalc! Amazingly accurate compared to others out there. Adjusts for .vob overhead automatically!
- Rips (via DVD Decrypter) the VTS title set you specify for later processing FAST! This includes the audio and the index for processing subtitles!
- Runs DVD2AVI for you and saves a project file for use in your Avisynth script.
- Writes the Avisynth script for you! It will also add the proper lines for the Decomb.dll plug-in if you are having to process interlaced "extras".
- Determines frame count and flags .avs files (.avs-no-cce) if they have potential to crash CCE!
- Now autodetects Forcefilm/Decomb needs for NTSC DVDs with 99.9% accuracy! Also Detects interlacing for PAL, and will automatically write .avs scripts to deinterlace!
- Now autodetects Subtitles/Closed-Captioning needs based on your .ifo files! Will also automatically check the sub/cc boxes for you (if subs exist) if you set it to.
- Automatically uses vobsub to create .idx/.sub files for use with subrip, for 100% perfectly synced subtitles. Will demux Closed-Captioning stream also, if desired.
- Processes substreams/ccstreams into .sst/.scc for Scenarist importing (coming soon!)
- Includes a utility for running pulldown on your files after youve encoded them.
- Includes a utility for renaming your authored VTS set to the title set number youre replacing.
- Now processes all angles included in the chosen VTS/PGC!
- Ability to demux all VTSes at ONCE!
- More to come in the future, based on user feedback/needs!
MSDOS Editor 2.00
A utility that makes it easy to edit the fie MSDOS.SYS. You only have chekc or uncheck the boxes and select some options from a pulldown menu. After clicking the Accept button, the actual editing will more>>
Image Editor 2008
You can create and edit your digital images with ease! more>> By Evans Image Editor (EIE) is a free image editor that allows for editing and creation of animated or still images. It contains several GPU-powered image modifiers that take advantage of modern graphics hardware, giving you an instant preview of the effect while you adjust parameters. It also has a non-binary selection system, allowing you to "partially select" pixels and apply drawing tool and modification actions that perform weighted averages based on the selection value.
EIE has a non-binary selection system which allows you to soften the edges of your selected pixel region.
EIE allows you to select multiple layers/frames at once and perform batch modifications. Modifiers can use either the GPU or CPU. CPU-based modifiers will split the processing of multiple images among multiple processors, taking advantage of systems with multi-core processors.
EIEs hue brush tool allows you to modify the defining color of pixels without changing the perceptual detail level. This shot shows the hue brush tool changing the green leaves to orange.
EIE has animated cursor read and write support. You can create your own animated cursors from scratch, convert animated GIFs to animated cursors, or convert animated cursors to animated GIFs.
Additional Features
* Can work in layers mode or frames mode (use the pulldown at the right side of the tool bar to switch between the two)
* Can load .AVI movies. Upon loading a movie, you can scroll through its frames to a point of your choice, and then extract frames (Frame -> Extract frames from selected video)
* Animated GIF read and write support
* Icon and cursor read and write support. Icons and cursors files can be created with multiple images of multiple resolutions.<<less
Identity Select 1.0
Thunderbird extension that allows you to choose the identity of your new email from a popup menu directly from the Write button more>>
The new message will automatically assume the default identity of the account that owns the currently selected folder. Please note that the global Inbox is not owned by any account and the default behavior of the Write button is unaffected when any subfolder of the global Inbox is selected.
System requirements:
- Thunderbird: 1.5 ? 1.5.0.*
- Page: 1 of 2
- 1
- 2
