| Sponsored Links | ||||||||||||||
|
| ||||||||||||||
|
Collapse All
|
||||||||||||||
| Software Name | Software Type | Category | Price | |||||||||||
| 1 | Raid 2 Raid 1.0 |
windows | Utilities->Disk Maintenance and Repair | Free |
View Detail
|
|||||||||
Unlock your native RAID array! Stop depending on the system board chipset to support your RAID configuration! Mount RAID arrays and Dynamic Disks created with all current Intel, nVidia or VIA chipsets on any other chipset and on all versions of Windows with free Raid 2 Raid software. Motherboard failed? Upgraded to a different chipset? Changed brand or manufacturer of a system board? Don t get locked into a single chipset! Raid 2 Raid will mount your RAID array no matter what chipset you were using then and no matter what you are using now. New motherboard does not have built-in RAID support? No problem! Raid 2 Raid will accommodate your existing RAID arrays on the new PC - whether or not it supports hardware RAID! Created a Dynamic Disk with Windows? Moving the software RAID onto another PC? Raid 2 Raid will mount any Dynamic Disk on any version of Windows no matter whether or not it supports the Dynamic Disks! Raid 2 Raid recognizes and fully supports the native RAID arrays of the following types: JBod (RAID 0), Stripe (RAID 0), Mirror (RAID 1), RAID 5 (data recovery mode if any single disk is missing or corrupted), and RAID 0+1 (RAID 10). Software-based RAID and Windows Dynamic Disks of the following types are supported: Simple, Span, Stripe, Mirror and RAID 5 arrays. Recognizing FAT, NTFS, and EXT2 file system and supporting Classic and GPT Partition Style introduced in Windows 2008 Server makes Raid 2 Raid a truly universal RAID adaptor. Raid 2 Raid is completely free - download your copy now and get your RAID back! |
||||||||||||||
| 2 | RAID Reconstructor 3.30 |
windows | System->Back Up and Recovery | $99 |
View Detail
|
|||||||||
RAID Reconstructor description RAID Reconstructor - Recover data from a broken RAID Level 5 or RAID Level 0 Array RAID Reconstructor will helps you to recover data from a broken RAID Level 5 or RAID Level 0 Array. Even if you do not know the RAID parameters, such as drive order and block size, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive.. Runtimes RAID Reconstructor will help you to recover data from broken · RAID Level 5 Array consisting of 3 to 14 drives · RAID Level 0 Array (Striping) consisting of 2 drives Even if you do not know the RAID parameters, such as drive order, block size and direction RAID Reconstructor is Read-Only It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping". Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives. The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets Requirements: · Pentium processor · 32 MB RAM · Disk controller card capable of handling all the drives in your RAID individually · Storage space for holding the reconstructed RAID Limitations: · Analyze option disabled · 30 day trial |
||||||||||||||
| 3 | RAID Reconstructor 2.31 |
windows | Utilities->Misc Utilities | $99 |
View Detail
|
|||||||||
Runtimes RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives. Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive. Once you created an image you can use it for further data recovery processing with Runtimes GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it. RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping". Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives. The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets. |
||||||||||||||
| 4 | RAID Reconstructor 3.03 |
windows | System->Back Up and Recovery | $99 |
View Detail
|
|||||||||
Runtimes RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives. Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in an image file or on a physical drive. Once you created an image you can use it for further data recovery processing with Runtimes GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it. RAID Reconstructor is read-only. It will not try to "fix" your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called "de-striping". Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives. The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets. |
||||||||||||||
| 5 | RAID Recovery 3.0 |
windows | Utilities->Backup Recovery | Free |
View Detail
|
|||||||||
|
||||||||||||||
| 6 | DiskInternals Raid Recovery 1.0 |
windows | Utilities->Disk Analysis | $249.95 |
View Detail
|
|||||||||
Recover corrupted RAID arrays in a fully automatic mode. Raid Recovery is the first tool to automatically detect the type of the original RAID array while still allowing for fully manual operation. Raid Recovery is no doubt a highly valuable tool for users of all types of RAID arrays, whether hardware, native, or software. The drag-and-drop user interface allows specifying parts of the RAID array by simply dragging and dropping icons representing the disks. Reconstruct all types of arrays just as easily as a single hard disk. Raid Recovery recognizes all imaginable configurations of various types of arrays, including RAID 0, 1, JBOD, RAID 5, and 0+1, no matter whether they are connected to a dedicated RAID controller or a RAID-enabled motherboard from NVidia, Intel, or VIA. Microsoft software raids (also called Dynamic Disks) are also supported, including JBOD (span), RAID 0, 1, and 5 configurations. Detecting the right type of an array is vital for correct recovery. Raid Recovery supports both manual and fully automatic detection of essential parameters such as type of array, type of RAID controller, stripe size, and disk order. Assemble RAID configurations manually via a simple drag-and-drop operation. Raid Recovery re-constructs an array from the available hard disks being simply dragged and dropped, and detects the right type and size or the array as well as the order of the disks automatically. Anyone can recover broken RAID arrays with Raid Recovery! Raid Recovery gives top priority to your data, allowing you to recover and back up all files from the corrupted array before attempting to fix it. You can store the files on another hard disk or partition, use a recordable CD or DVD, or even upload the files over FTP. Raid Recovery uses advanced search algorithms that allow recovering important files such as documents, pictures and multimedia even if there is a missing disk in the array, or if the file system is missing or damaged. |
||||||||||||||
| 7 | Linux ATA RAID HOWTO 2.1 |
linux | Miscellaneous->Documentation | Free |
View Detail
|
|||||||||
Linux ATA RAID HOWTO explains how to setup RedHat on a system with Promise Fasttrack RAID. The Linux ATA RAID HOWTO explains how to set up RAID 1 (disk mirroring) and then install Red Hat Linux on the mirror device. Promise Technology was one of the first companies to come up with quasi-hardware RAID for inexpensive IDE hard disks. This document covers using the Promise proprietary RAID driver as well as the Linux native ATA RAID. Whats New in This Release: · Minor enhancements |
||||||||||||||
| 8 | RAID Monitor 2.6.2 |
mac | Network Communication->Network Administration | $19 |
View Detail
|
|||||||||
RAID Monitor is a very useful tool that will automatically check the status of any software RAID. If a fault is found with the RAID it will generate an email and play a system alert sound. Email alerts are repeatedly sent to the recipients until the error has been resolved. RAID Monitor will also send an email report every 24-hours to give you peace of mind that the RAID is functioning correctly and the email link between you and your RAID is functioning correctly. |
||||||||||||||
| 9 | VIA RAID 5.30c |
driver | Other->HP | Free |
View Detail
|
|||||||||
VT8251 Integrated Serial ATA RAID controller VT8237 Integrated Serial ATA RAID controller ( VT8237 VT8237 ) Discrete Serial ATA RAID controllers VT6420/1 ( VT6420 VT6421 ) VT6410 IDE RAID controller ( VT6410 ) CX700 Integrated Serial ATA RAID controller It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. |
||||||||||||||
| 10 | Raid Disk Sizer 1.5 |
pda | System Utilities->Others | FREE |
View Detail
|
|||||||||
Raid Disk Sizer will help you configure your Disk RAID 5 subsystem. It will tell you how many disks is required, disks group size and number of group required per Gigabytes. Requirements: · Palm OS v3.0 |
||||||||||||||
| 11 | RAID Alert 1.2.0 |
mac | Utilities->System Utilities | Free |
View Detail
|
|||||||||
Redundant Arrays of Inexpensive Disks (RAIDs) allow safe and inexpensive, safe storage of important data using two (or more) hard disks - either internally or as Firewire drives. Apple delivers software for buidling mirrored software RAIDs with every copy of Mac OS X. RAID Volumes continue to work even if one drive failes. However, the failed drive should be replaced ASAP. Without RAID Alert, those failures might go unnoticed! RAID Alert informs you about any RAID systems status changes (esp. failures) via email, a notification dialog and alert sound. Try this feature-complete test version! |
||||||||||||||
| 12 | VIA RAID 5.20C |
driver | Other->HP | Free |
View Detail
|
|||||||||
VT6410 IDE RAID controller ( VT6410 ) Discrete Serial ATA RAID controllers VT6420/1 ( VT6420 VT6421 ) VT8237 Integrated Serial ATA RAID controller ( VT8237 VT8237 ) VT8251 Integrated Serial ATA RAID controller It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. |
||||||||||||||
| 13 | nVidia nForce RAID 5.06 WHQL |
driver | Other->HP | Free |
View Detail
|
|||||||||
Todays computing experiences are increasingly dependent on overall system performance, high-speed networking, rich streaming media, and a variety of multimedia capabilities. While CPU and graphics processing unit (GPU) speeds and system capacities advance at an aggressive pace, the basic system architecture continues to evolve more slowly, and various critical devices and subsystems often degrade the overall experience. The first NVIDIA nForce MCPs were introduced to meet these challenges. And the newest NVIDIA nForce solutions extend this tradition of delivering advanced core technologies and industry-leading performance to today s computer platforms through the NVIDIA RAID storage solution bundled with NVIDIA ForceWare platform software.1 The benefits of the NVIDIA RAID advanced storage solution: Delivers unmatched storage performance and scalability with dual controller architecture: Exploits the dedicated storage controller in NVIDIA nForce MCPs so that as SATA devices are added to RAID 0 or RAID 0+1 array your storage performance increases. Added protection for your most important digital assets: Simply assign a spare disk to any RAID 1 or RAID 0+1 array for greater protection of stored digital assets. NVIDIA RAID notifies you when a disk fails and instructs you on which one to replace. Simple user interface makes RAID management a breeze: Simple point-and-click menus with informative wizards allow you to easily monitor, manage, and modify your storage arrays. The industry s first RAID solution for the latest SATA 3Gb/s disk drives: SATA 3Gb/s doubles bus bandwidth and improves disk performance for blazingly fast disk performance. |
||||||||||||||
| 14 | RAID Data Recovery 3.0 |
windows | Utilities->Backup Recovery | Free |
View Detail
|
|||||||||
|
||||||||||||||
| 15 | VIA V-RAID Driver 5.50b |
driver | Other->HP | Free |
View Detail
|
|||||||||
Compatible with: VT8251 Integrated Serial ATA RAID controller VT8237 Integrated Serial ATA RAID controller Discrete Serial ATA RAID controllers VT6420/1 VT6410 IDE RAID controller CX700 Integrated Serial ATA RAID controller VX700 Integrated Serial ATA RAID controller VT8251 Integrated Serial ATA RAID controller VT8237 Integrated Serial ATA RAID controller Discrete Serial ATA RAID controllers VT6420/1 VT6410 IDE RAID controller ( VT6410 ) CX700 Integrated Serial ATA RAID controller ( CX700 ) VX700 Integrated Serial ATA RAID controller ( VX700 ) It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. |
||||||||||||||
| 16 | RAID Data Recovery 3.0 |
windows | Utilities->Backup Recovery | Free |
View Detail
|
|||||||||
RAID Data Recovery - For Raid data recovery you need expert help. Get the expert raid data recovery help you need with this free application right now. It's very easy to install and use. Raid Data recovery help,data1.msi. |
||||||||||||||
| 17 | Asrock 775XFire-RAID 1.40 |
driver | Bios->Asrock | Free |
View Detail
|
|||||||||
Features: LGA 775 for Intel Pentium 4 / Celeron D (Cedar Mill) processors Intel 925X Chipset Supports FSB 800/533 MHz processor, EM64T CPU and H-T Technology Supports Dual Channel DDRII533 x 4 DIMMs Supports ATI CrossFire PCI Express x 16 slot Additional AGI Express slot to adopt 2nd PCI Express x 16 VGA card, and other PCI Express x4, x2, x1 interface cards PCI Express x 1 slot Hybrid Booster - Safe Overclocking Technology 4 x Serial ATA 1.5 Gb/s connectors, support RAID (RAID 0, RAID 1, and Intel Matrix Storage), NCQ, AHCI and "Hot Plug" functions, and 1 ATA100 IDE port 7.1 Channel with High Definition Audio, 10/100 Ethernet LAN Windows Vista Hardware Ready HD 8CH I/O: 4 ready-to-use USB ports, 7.1 channel audio jack It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. |
||||||||||||||
| 18 | Small Unit Raid |
script | PHP | Free |
View Detail
|
|||||||||
|
||||||||||||||
| 19 | JES Movie RAID 0.6 |
mac | Multimedia Design->Multimedia | Free |
View Detail
|
|||||||||
The only Mac video digitizer that can handle TV data rates! Digitizes uncompressed full size video (576x720 or 480x640) at full frame rate. Movie RAID comes with a configuring utility which lets you set the disks to save to (up to 4) and set a timer for unattended recording (multiple recordings possible, programmed up to 23 hours ahead of time). After digitizing you have the option to have the video frame durations regularized (for example 100 on time scale 2997). This can prevent loss of frames in editing applications or in conversion to DV or DVD. The audio will be resampled to stay in sync if necessary. Sample rate options are 22.05 kHz, 44,1 kHz, 32 kHz and 48 kHz. |
||||||||||||||
| 20 | Quick Recovery for RAID-5 10.x |
windows | Utilities->Backup Recovery | $794.00 |
View Detail
|
|||||||||
|
||||||||||||||
My Software
You have not saved any software. Click "Save" next to each software to save it to your software basket
