Free removal tool 1.0 software for windows

XPS Removal Tool 1.0.1.34 gives you a flexible and sophisticated tool with which you can remove the Microsoft XPS Document Writer (MXDW) print queue and driver package from a Windows Vista installation. XPS Removal Tool can also uninstall XPS Essentials Pack from Windows XP and Windows Server 2003.

Requirements: Windows XP/2003 Server/Vista

W32.Klez Removal Tool removes the Klez worm from your computer.
W32.Klez.gen@mm is a generic detection that detects variants of W32.Klez.
Computers that are infected with W32.Klez.gen@mm have most likely been exposed to either W32.Klez.E@mm or W32.Klez.H@mm.
If your computer is detected as infected with W32.Klez.gen@mm, download and run the tool. In most case, the tool will be able to remove the infection.
Usage:
- Close all the programs.
- If you are on a network, or if you have a full-time connection to the Internet, disconnect the computer from the network and the Internet.
- Shut down the computer and turn off the power. Wait 30 seconds. Do not skip this step.
- Restart the computer in Safe mode. All the Windows 32-bit operating systems, except Windows NT, can be restarted in Safe mode. For instructions on how to do this, read the document, "How to start the computer in Safe Mode."
- Double-click the FixKlez.com file to start the removal tool.
- Click Start to begin the process and allow the tool to run.
- Normally restart the computer.
- Next, if you are using a Symantec antivirus product, re-install it.
- For consumer products such as Norton AntiVirus 2000/2001/2002/2003, follow the instructions in the document, "How to restore Norton AntiVirus after removing a virus."
- For Enterprise products, contact your system administrator.
- Run LiveUpdate to make sure that you are using the most current virus definitions, and then rescan the computer. If your Symantec antivirus product detects any infected files and cannot repair them, choose to delete the files.
- If you are running Windows Me/XP, re-enable System Restore.

WM.Slammer Removal Tool is a free virus killer tool.

W32.Sasser Removal Tool 1.0.1 has come as an efficient wiping tool to eliminate the infections of the following variants of the W32.Sasser worm: W32.Sasser.Worm, W32.Sasser.B.Worm, W32.Sasser.C.Worm, W32.Sasser.D.Worm

W32.Secefa Removal Tool is designed to remove the infections of the following threats:
- W32.Secefa.A
- W32.Secefa.B
- W32.Secefa.C
- Trojan.Gamqowi
If you are on a network or have a full-time connection to the Internet, such as a DSL or cable modem, disconnect the computer from the network and Internet. Disable or password-protect file sharing, or set the shared files to Read Only, before reconnecting the computers to the network or to the Internet.
To ensure that the worm does not reinfect the computer after it has been removed, Symantec suggests sharing with Read Only access or by using password protection, because W32.Secefa spreads by using shared folders on networked computers.
If you are removing an infection from a network, first make sure that all the shares are disabled or set to Read Only.
This tool is not designed to run on Novell NetWare servers. To remove this threat from a NetWare server, first make sure that you have the current virus definitions, and then run a full system scan with the Symantec antivirus product.
Usage:
- Close all the running programs.
- If you are on a network or if you have a full-time connection to the Internet, disconnect the computer from the network and the Internet.
- If you are running Windows Me or XP, turn off System Restore
- Click Start to begin the process, and then allow the tool to run
- Restart the computer.
- Run the removal tool again to ensure that the system is clean.
- If you are running Windows Me/XP, then reenable System Restore.
- If you are on a network or if you have a full-time connection to the Internet, reconnect the computer to the network or to the Internet connection.
- Run LiveUpdate to make sure that you are using the most current virus definitions.
When the tool has finished running, you will see a message indicating whether the threat has infected the computer. The tool displays results similar to the following:
- Total number of the scanned files
- Number of deleted files
- Number of repaired files
- Number of terminated viral processes
- Number of fixed registry entries
W32.Secefa Removal Tool does the following:
- Terminates the associated processes
- Deletes the associated files
- Deletes the registry values added by the threat

W32.Rajump Removal Tool designed to remove the infections of W32.Rajump
Important:
If you are on a network or have a full-time connection to the Internet, such as a DSL or cable modem, disconnect the computer from the network and Internet. Disable or password-protect file sharing, or set the shared files to Read Only, before reconnecting the computers to the network or to the Internet. Because this worm spreads by using shared folders on networked computers, to ensure that the worm does not reinfect the computer after it has been removed, Symantec suggests sharing with Read Only access or by using password protection.
If you are removing an infection from a network, first make sure that all the shares are disabled or set to Read Only.
This tool is not designed to run on Novell NetWare servers. To remove this threat from a NetWare server, first make sure that you have the current virus definitions, and then run a full system scan with the Symantec antivirus product.
How to download and run the tool
Important: You must have administrative rights to run this tool on Windows NT 4.0, Windows 2000, or Windows XP.
Note for network administrators: If you are running MS Exchange 2000 Server, we recommend that you exclude the M drive from the scan by running the tool from a command line, with the Exclude switch.
Follow these steps to download and run the tool:
- Download the FxRajump.exe file
- Save the file to a convenient location, such as your Windows desktop.
- Close all the running programs.
- If you are on a network or if you have a full-time connection to the Internet, disconnect the computer from the network and the Internet.
- If you are running Windows Me or XP, turn off System Restore.
- Locate the file that you just downloaded.
- Double-click the FxRajump.exe file to start the removal tool.
- Click Start to begin the process, and then allow the tool to run.
NOTE: If you have any problems when you run the tool, or it does nor appear to remove the threat, restart the computer in Safe mode and run the tool again.
- Restart the computer.
- Run the removal tool again to ensure that the system is clean.
- If you are running Windows Me/XP, then reenable System Restore.
- If you are on a network or if you have a full-time connection to the Internet, reconnect the computer to the network or to the Internet connection.
When the tool has finished running, you will see a message indicating whether the threat has infected the computer. The tool displays results similar to the following:
- Total number of the scanned files
- Number of deleted files
- Number of repaired files
- Number of terminated viral processes
- Number of fixed registry entries
What the tool does
The Removal Tool does the following:
- Terminates the associated processes
- Deletes the associated files
- Deletes the registry values added by the threat