Free salvage software for windows

Smart Data Recovery is a free and useful data recovery utility Smart Data Recovery is a free and useful data recovery utility for Windows operating system that supports the FAT and NTFS file systems. The software easily recovers data from hard disks, digital cameras, and any type of storage media - flash drives, USB drives, memory stick, PC card, multimedia card, secure digital card and diskette.
Smart Data Recovery can recover any deleted files, including MS Office files, photos, mp3 and zip files, even if the partition table is lost!
Maximize your chances of successfully recovering a deleted document by running a dedicated data recovery tool. Free, reliable and easy data recovery solution designed for safe and reliable operation.
What kind of tools would you use if you accidentally deleted a file, and want to get it back? Would this be an expensive, bulky, all-in-one solution? They usually work fine, but do you really need the extra cost and delay caused by the need to actually purchase this product? Besides, the bigger and bulkier data recovery product has greater chances of overwriting the space occupied by your deleted files, thus making them completely impossible to recover.
If you want to maximize your chances to successfully recover a deleted file, you should avoid or at least minimize activities that result in write operations to your hard disk or other media where the deleted document was stored.
If you have to install data recovery software to the hard drive where your deleted files were, your chances of getting these files back will increase if you download smaller data recovery tool then if you install a bigger, bulkier suite.
Your best bet is downloading and installing a data recovery tool well in advance.
Does it make sense to buy a data recovery tool that you may never need? Not much. Does it make sense to install and keep a small, lightweight utility that can be used immediately in case you delete an important document? This can be a life saver.
Smart Data Recovery offers you a free, reliable and lightweight data recovery solution that you can download and use at no charge. Get it in advance, install and always keep it handy in case you need to recover a document. If the documents are already deleted, and you are looking for an emergency recovery solution, Smart Data Recovery is an ideal one. It is light, it is free, and it is immediately available to salvage your files. Remember, the sooner you act, the higher chances of successful recovery you get!

NTFSDOS Professional - Full read/write access to NTFS drives from DOS! If you are interested in accessing NTFS drives from Windows 95 or Windows 98 you should use NTFS for Windows 98 rather than NTFSDOS Professional, which is available as part of Winternals Administrators Pak. If you want to salvage files off a corrupt NTFS volume or repair an NTFS boot sector or partition table, see Winternals Disk Commander, also part of the Administrators Pak
NTFSDOS Professional mounts your NTFS volumes and gives them drive letters, so you can run applications and use files on NTFS volumes transparently. NTFSDOS Professional is small enough to run from a MS-DOS boot diskette so you can even access NTFS volumes on a system where Windows NT/2000/XP isn?t installed or able to boot. This makes it ideal for repairing corrupt files or configuration problems that prevent a Windows NT/2000/XP system from booting.
The advantage NTFSDOS Professional has over NTFSDOS is that it relies on Microsofts implementation of NTFS rather than our own information on the NTFS file-system layout. However, NTFSDOS is still sometimes useful for cases where you want to recover data off of a NTFS drive that Windows NT/2K no longer recognizes, because NTFSDOS is more lax about recognizing NTFS drives than the Windows NT/2K NTFS driver.
NTFSDOS Professional also comes with NTFSCHK, a tool for running the Windows NT/2000/XP CHKDSK program from within MS-DOS. NTFSCHK allows you to verify and repair the NTFS disk structure in case of accidental corruption.
NTFSDOS Professional runs on MS-DOS and mounts NTFS drives so your MS-DOS applications can use them. It takes the files and drivers that compose NTFS from an existing Windows NT/2000/XP installation and simulates the environment they normally run in, allowing them to run inside of MS-DOS. This approach allows NTFSDOS Professional to access your NTFS volumes using the same Microsoft drivers that Windows NT/2000/XP uses, ensuring compatibility with your NTFS drives regardless of the version and Service Pack of NT you happen to use.
NTFSDOS Professional is a 32-bit program which uses the DOS Protected Mode Interface (DPMI) to let it run in the 16-bit MS-DOS environment. It implements a network file system redirector, allowing the programs on your system to think they are making requests to a network drive, when in fact the requests are being routed to the NTFS file system driver and then to your local hard disk.
Once you have run Creator you are ready to boot into MS-DOS and begin using NTFSDOS Professional.
To start NTFSDOS Professional, simply execute it from the DOS command line or from your AUTOEXEC.BAT. NTFSDOS must be started from the directory that contains its support files. When NTFSDOS Professional starts it will scan all hard-disk partitions on your system looking for NTFS drives. It will mount each NTFS drive it finds with a unique DOS drive letter.
Once the NTFS drives are mounted you can treat them just as you do any other drive on your system.
NTFSDOS Professional indicates the locations of the partitions it mounts using the BIOS unit number and partition. The unit, starting at 80, indicates the physical hard disk, while partitions are numbered sequentially on each unit starting at 1. The screenshot indicates that NTFS volumes were found on the 3rd partition of the first disk, and the 1st partition of the second disk.
You can specify your time zone by either using the /T command line option (?/T-5:00?) or by setting the ?TZ? environment variable (?TZ=-5:00?). The general form of the time zone specification is [+|-]hh[:mm[:ss]] where hh is hours, mm is minutes and ss is seconds.
It may not be important to you to set the time zone information before using NTFSDOS Professional, but remember that file times will be reported to you up to 12 hours off their actual times, and when you boot back into Windows NT/2000/XP any files you have modified will similarly have incorrect time stamps.
NTFSDOS Professional supports long file names, just as Windows 95/98/NT/2000/XP do. Long file name support was introduced to MS-DOS in version 7.0 (the version released with Windows 95), so if you use MS-DOS 7.0 you will see your Windows NT/2000/XP files with the regular names, rather than the 8.3 names. If you use an earlier version of MS-DOS you can still access your files, but you will need to use names like ?PROGRA~1? rather than ?Program Files?.
Many people believe that MS-DOS doesn?t support long file names at all, but that isn?t the case. It is the MS-DOS FAT file system driver that lacks support, rather than MS-DOS itself. When used with a file system that supports long file names MS-DOS handles them fine, as do MS-DOS applications that are written to take advantage of the support.
The result of this situation is that if you copy a file with a long file name from NTFS to a local FAT drive, you will lose the long file name. However, if you copy it to a network drive that supports long file names, or to another NTFS drive, the long file name will be preserved. Similarly, if you use an archiver (such as one of the ZIP compressors) that supports long file names on an NTFS drive, the long file name information will be preserved.
The performance of NTFSDOS Professional is surprisingly good, considering that it runs on MS-DOS. NTFSDOS Professional is a 32-bit protected mode program, which means that the code usually executes at the same rate as for programs running under Windows NT/2000/XP and Windows 95/98. NTFSDOS Professional is not as fast as Windows NT/2000/XP overall, however, because it must switch back to 16-bit mode in order to interface to MS-DOS and the BIOS, to access the disk, and to interact with other applications.
NTFSDOS Professional implements its own disk cache for use when accessing NTFS volumes. You can increase the size of the disk cache in order to increase performance by using the /C option (?/C2000? sets the cache to 2000KB). The cache uses a write-through policy, meaning that while data read from the disk is served from the cache (if available), data written to disk is always committed to disk immediately. This is done to minimize loss of data in case of a crash.
NTFSDOS Professional is capable of using up to 64MB of physical memory for caching and other operations.
You can change the default behavior of NTFSDOS Professional by specifying one or more command line options. NTFSPRO.EXE understands the following options:
/L:
Specify the set of drive letters you wish to NTFSDOS Professional to use when mounting NTFS volumes. Multiple drive letters may be listed, and each NTFS drive will be mounted according to its position in the sequence
/C:
Allocates the specified amount of memory for the disk cache.
/T:[+|-]hh[:mm[:ss]]
Specifies the local time zone in effect, for translating NTFS time stamps from Universal Coordinated Time to local time.
System requirements:
- A Windows NT/2000/XP Workstation or Windows NT/2000/XP Server installation (version 4.0 Service Pack 3 or higher).
- MS-DOS 5.0 or higher. It is strongly recommended that you use MS-DOS version 7.0 (the version of MS-DOS that ships with Windows 95/98), since it is the only version that will allow you to use long filenames with your NTFS drives. Using earlier versions of MS-DOS restrict you to using file names in 8.3 format.
- If your hard disk is 4GB or larger then your BIOS must support the Extended Int 13 interface (defined in the Enhanced Disk Drive Specification). Most newer systems provide such support, as it is necessary for Windows 95/98 to access large disks.
- NTFSDOS Professional does not include licensing for MS-DOS or Windows NT/2000/XP. You should have a license for MS-DOS (or Windows 95/98) and Windows NT/2000/XP for each system on which you intend to run NTFSDOS Professional.
- NTFSDOS Professional does not support Windows NT/2000/XP fault-tolerant or multi-volume drives. There is no support forvolume sets, mirrors, stripe sets, or stripe sets with parity.

Unreal Tournament 2004 DM 1on1 Incuvasion map is regarded as a simple and effective deathmatch map for Unreal Tournament 2004 which takes place on a wrecked space ship. The ship was once used to colonize newly discovered planets, but was somehow wrecked and now the salvaged piece is used in the tournament.

Requirements:

• Windows 98/Me/2000/XP
• Unreal Tournament 2004 retail version

Tapur 2.3 is a helpful add-on software application for Skype. Tapur is answering machine, voice and movie recorder for Skype. It has Explorer-style user interface, friendly and easy to use. Tapur has personalized and flexible answering setting.

Requirement:

• Windows2000 / XP / 2003Server / Vista / 7