Free system32 software for windows

YeXploitation is a free id maker utility.
Please Note, if on opening this program you get a system error, move all the ActiveX files(ocx) to your system32 folder and register them. Any other problems feel free to contact me via ouR support forums or via the email address given.

Batch File Maker is an excellent program that you may use to create and modify batch files which can launch any other file Batch File Maker is an excellent program that you may use to create and modify batch files which can launch any other file from the command line/run dialog.
This program will create a .bat or .cmd file that launches whatever file is specified.
This file when copied to the System32 folder of the Windows Operating System can launch it by typing its name into the Run Program dialog box.
System requirements:
- 64.0 MHz Microprocessor or higher
- 7.0 MB of RAM

FFT3dGPU is a GPU version of Fizicks FFT3DFilter. The algorithm (Fast Fourier Transform, denoising) is the same for the most part. Currently the following is not implemented: support for interlaced video or YUY2 colorspace or noise pattern.
In this version the next frame is processed while waiting for the GPU to end its work. Meaning the filters before fft3dGPU are working concurrently with it.
Installation
To use this filter you need directx 9.0c or better and a graphics card supporting directx 9 in hardware. That is at least an ATI Radeon 95xx or Nvidia Geforce fx 5xxx. Geforce 6xxx or better is recommended. If you have downloaded the installer just run it at youre done, else copy fft3dgpu.hlsl and copy FFT3dGPU.dll into the same directory, also copy d3dx9_30.dll to the c:\windows\system32 directory.
Older versions also had fft3dgpu9b.dll (not available at the moment) for Directx 9.0b support (DONT copy both dll into the autoload directory.) Directx 9.0c might be faster for people using Nvidia Geforce 6xxx because it adds support for pixelshader 3.0. If you dont have the latest version of directx installed (april 2006 or later) you can get it here or extract the file d3dx9_30.dll to the c:\windows\system32 directory. The installer will copy d3dx9_30.dll to the right location meaning that it shouldnt be neccesary to run the directx installer if you have Directx 9c installed.
Syntax
FFT3DGPU(clip, float "sigma", float "beta", int "bw", int "bh", int "bt", float "sharpen", int "plane", int "mode", int "bordersize", int "precision", bool "NVPerf", float "degrid", float "scutoff", float "svr", float "smin", float "smax", float "kratio", int "ow", int "oh", int "wintype" , int "interlaced", float "sigma2", float "sigma3", float "sigma4", bool "oldfft" )
Function parameters:
clip: the clip to filter. The clip must be YV12.
sigma and beta has the same meaning as in fft3dfilter. Default=2.
sigma2, sigma3, sigma4 If specified controls the sigma value for highest(sigma) to lowest frequency(sigma4). Default=sigma
bw,bh: blockwide and block height. It should be a power of 2 ie valid values is 4,8,16,32,64,128,256,512 (note that bw should be greater than 4 for best result). Default=32
bt: mode. bt=-1 sharpen only, bt=0 kalman filtering, bt=1 is 2d filtering, bt=2 uses the current and previous frame, bt=3 uses the previous current and next frame, bt=4 uses the two previous frames, the current and next frame. default 1
sharpen: positive values sharpens the image, negative values blurs the image. 0 disables sharpening. Default 0.
plane: 0 filters luma, 1,2 and 3 filters Chroma (both U and V). 4 filters both luma and chroma. Default 0.
mode: 0 only overlaps 1:1. This is faster but produces artifacts with high sigma values.
mode=1 block overlaps 2:1. This is slower but produces fewer artifacts.
mode=2 again 1:1 overlap but with a additional border. This reduces border artifacts seen with mode=0. The speed is between mode 0 and 1.
Kalman(bt=0) works well with mode=0. Default 1
bordersize: only used with mode 2. Defines the size of the border. Default is 1.
precision: 0: to use 16 bit floats(half precision),
1: to use 32 bit float(single precision) for the fft and 16 bit float for the wienner/kalman and sharpening.
2: allways use 32 bit floats.
Using 16 bit float increases the performance but reduces precision. With a Geforce 7800GT precision=0 is ~1.5 times faster than than mode 2. Default=0.
NVPerf: Enables support for NVPerfHUD (http://developer.nvidia.com/object/nvperfhud_home.html). Default false.
degrid: Enables degriding. Only works well with mode=1. Doesnt degrid the Kalman filter (but it does degrid the sharpening (if enabled) after kalman filter). default 1.0 for mode=1, 0.0 for mode=0 or 2
scutoff, svr, smin, smax:Same meaning as fft3dfilter. Controls the sharpening. default scutoff=0.3, svr=1.0, smin=4.0, smax=20.0
kratio: same as fft3dfilter. Control the threshold for reseting the Kalman filter. Default 2.0
ow,oh: this only works with mode=1. This specifies how big the overlap between the blocks are. Overlap size must be less than or equal to half the blocksize. Ow must be even. Default: ow=bw/2 ,oh=bh/2
wintype: Change the analysis and syntesis window function. Same as fft3dfilter
interlaced: Set to true for separate filtering for each field. Default=false.
oldfft: Set to true to use the old fftcode (used in version 0.6.2 and lower) false to use new fft code. If not defined fft3dgpu will use the fastest code.
FAQ:
Q: What does it mean when I get a popup box Unexpected error encountered with Error Code: D3DERR_OUTOFVIDEOMEMORY.
A: It means that fft3dgpu needs more memory than there are availebol on the graphics card. So either you will have to upgrade or try lowering the resolution,bt,bh,bw,ow,oh or use usefloat16=true or mode 0 or 2
Q: What setting gives the same result as fft3dfilter?
A:fft3dGPU(mode=1,precision=2) is similair to fft3dfilter() but please note the different default values for bw,ow,bh,ow
Q: Is there any differences between fft3dfilter and fft3dgpu?
A: Some of the features from fft3dfilter is still missing.
Q: Why is fft3dGPU so slow compaired to fft3dfilter?
A: either you have a slow graphics card like a Geforce FX 5200 or you are not using it while doing cpu heavy encoding (like XviD/DivX)
Q: How do I use NVPerfHUD?
A: set NVperf=true and used this commandline or make a shortcut to run it: "PATH TO NVPerfHUD\NVPerfHUD.exe" "PATH TO VIRTUALDUBMOD\virtualdubmod.exe" "PATH TO AVS\test.avs" and enabled "force NON PURE device"
Q: I get this errormessage: "Only pixelshader 2.0 or greater supported"
A: It is because you need a graphics card that has hardware support for Directx 9.

This program can add subtitles to an avi file using (up to 8) .srt or .idx/sub files and create a new .divx file Sub2DivX is an easy-to-use, simple application that will allow you to add subtitles to avi files.
Sub2DivX can add subtitles to an avi file using (up to 8) .srt or .idx/sub files and create a new .divx file
Main features:
- Support for font, fore color, outline color (and width) and shadow color (and bevel) for .srt subtitles
- Support , and , tags
- Auto change font size for long subtitles, in order to fit at maximum width
- Set horizontal and vertical position
- Inside alignment (left, center, right) - check picture
- Global settings and/or single settings (only for selected subtitles)
- Remove audio/subtitle streams
- Support for right to left languages
- Preview window
- Multiple languages
- Batch commands
System requirements:
- required: msvbvm60.dll and comctl32.ocx - in most of the cases the 2 files above will be at yours system32 folder
- required: DivXMux
- required: BmpToxSub