wirelessmon

Download WirelessMon 2.0 1888K

• graphing
,
• measure
,
• drivers
,
• network monitor
,
• hot
,
• hardware
,
• scan
,
• statistics
,
• test
,
• area
,

Download WirelessMon 2.1.1001 2.05MB

• wireless
,
• wifi
,
• monitor
,
• detect
,
• monitoring
,
• network
,
• wardriving
,
• 802.11
,
• coverage map
,
• signal strength
,
• access points
,

Download WirelessMon 3.0.1002 2.34 MB

WirelessMon 2.0 enables a person to detect and monitor Access Points (AP) on any wireless (WiFi) networks within range. The program provides substantial information regarding each SSID it locates including whether the AP is secure (or not) and its availability for use.

A live channel usage chart provides information on the level of traffic for each available channel. This information will assist network managers by indicating channels that could be used to reduce interference and improve throughput.

Users of the Professional Edition will have the additional bonus of being able to generate coverage maps based upon the signal strength of all detected APs. To use this function, users need to import a map created by an another application (e.g. scanning). Once the map is loaded, users can either plot points manually on the map, or use a Global Positioning System (GPS) device. If done manually, the user selects a point on the map and the program automatically stores information on every AP it can detect there. GPS users need to establish two reference points, then they can leave it to the program to detect their location on the map and store the AP information for each point.

Network managers, laptop users and wardrivers will all find WirelessMon 2.0 to be the perfect tool for their wireless network requirements.

Requirements: 64 MB RAM, 3 MB of disk space, compatible 802.11 wireless adapter(s).

Whats new in this version: Added new boundary checks and warning messages when entering in GPS co-ordinates in DMS format; Updated help file with information about requirement of maps to be north aligned for correct calibration and mapping when using GPS co-ordinates; Other minor bug fixes.

Download WirelessMon 3.0 build 1000 2.0 MB

• wirelessmon
,
• build
,

Download WirelessMon 2.1 Build 1001 2.04 MB

• wirelessmon
,
• Build
,

Download WirelessMon 2.0 build 1013 1.96 MB

• wirelessmon
,
• build
,

Download WirelessMon 3.0 Build 1002 2.3 MB

WirelessMon can log the information collected into a file, provides comprehensive graphing of signal level and real time IP and 802.11 WiFi statistics.

WirelessMon is an application that will allow you to monitor the status of wireless WiFi adapter(s) and gather important information about nearby wireless access points and hot spots in real time.

Any wireless adapter complies with the NDIS_802.11 should be able to report information to WirelessMon. All the various IEEE 802.11 standards are supported, including 802.11a, 802.11b and 802.11g.

Some features may not be supported by some wireless adapters, typically they will report only partial information in this case. It has been also been noted that several wireless adapters manufacturers are not providing device drivers that are fully Windows compliant..

The following wireless LAN information can be provided by WirelessMon (when available, as not all wireless adapters will support all of these features):
· Current connection information: SSID; Connected Access Point MAC Address; Signal strength; Tx Power; Auth type; RTS Threshold; Frag Threshold; Channel; Frequency; Number of Antennas; Beacon Period; ATIM Window; Dwell Time; Hop Pattern; Hop Set.
· Staistics information: Transmitted Fragment Count; Multicast Transmitted Frame Count; Failed Count; Retry Count; Multiple Retry Count; RTS Success Count; RTS Failure Count; ACK Failure Count; Frame Duplicate Count; Received Fragment Count; Multicast Received Frame Count; Sent OK; RCV OK; Sent Error; RCV Error; Direct Bytes Sent; Directed Frames Sent; Multicast Bytes Sent; Multicast Frames Sent; Broadcasts Bytes Sent; Broadcasts Frames Sent; Directed Bytes RCV; Directed Frames RCV; Multicast Bytes RCV; Multicast Frames RCV; Broadcasts Bytes RCV; Broadcasts Frames RCV.
· IP information: Adapter MAC Address; Adapter Name; Adapter IP Address; Subnet Mask; DHCP Enabled; Gateway Address; DHCP Server; Lease Obtained; Lease Expired; DNS Server.
· IP counter information: Band Width; Sent Rate (Bytes/Second); Data Rate (Packets/Second); RCV Rate (Packets /Second); Sent Rate (Packets/Second); Output Queue Length; RCV Counter Error; Sent Counter Error.

Features of "WirelessMon":

· Verify 802.11 network configuration is correct.
· Test WiFi hardware and device drivers are functioning correctly.
· Check signal levels from your local WiFi network and nearby networks.
· Help locate sources of interference to your network.
· Scan for hot spots in your local area (wardriving)
· Create signal strength maps of an area
· GPS support for logging and mapping signal strength
· Correctly locate your wireless antenna (especially important for directional antennas).
· Verify the security settings for local access points.
· Measure network speed & throughput and view available data rates.
· Help check Wifi network coverage and range


Requirements:

· CPU faster than 500MHz is recommended
· 64 MB RAM
· 3 MB of disk space
· compatible 802.11 wireless adapter(s)


Limitations:

· 30 day trial
· nag screen
· evaluation watermark on display, cannot save or print signal maps

Changes from previous version

· Added new boundary checks and warning messages when entering in GPS co-ordinates in DMS format
· Updated help file with information about requirement of maps to be north aligned for correct calibration and mapping when using GPS co-ordinates
· Fixed a bug where "Unable to move old config file.." error was shown when WirelessMon was installed on a different drive to the Windows system directories
· Fixed a bug where some GPS messages were being read incorrectly and not updating the position

• WiFi monitor
,
• adapter monitor
,
• status monitor
,
• WiFi
,
• network
,
• adapter
,